Car recalls in 1996
136 recall campaigns for the vehicles on this site were filed with NHTSA in 1996, covering about 16,793,978 vehicles.
December 1996
-
96V260000Dec 27
Antilock/traction control/electronic limited slip · CHRYSLER CORPORATION
Vehicle description: vehicles equipped with antilock brake system (ABS). The antilock brake system (ABS) hydraulic control unit CAN experience excessive brake…
-
96V256000Dec 27
Anchorage · FORD MOTOR COMPANY
The seat elt anchorage attachments are missing or misinstalled on these vehicles.
-
96V252000Dec 18
Suspension rear · FORD MOTOR COMPANY
The rear axle track bar bracket CAN separate from the frame due to missing welds or inadequate weld penetration.
-
96V251000Dec 18
Vehicle speed control · FORD MOTOR COMPANY
Vehicles originally sold or currently registered in the following states: alaska, montana, north dakota, minnesota, wisconsin, michigan (upper peninsula), new…
-
96V250000Dec 17
Hazard flashing warning lights · GENERAL MOTORS CORP.
The front and/or rear hazard warning lamps (four-way flashers) do not flash when the hazard switch is activated. This fails to comply with fmvss no. 108,…
-
96V249000Dec 17
Steering wheel/handle bar · GENERAL MOTORS CORP.
The steering column lower pinch bolt was not properly tightened during assembly.
-
96V248002Dec 12
Rear/other · AMERICAN HONDA MOTOR CO.
Certain vehicles were manufactured with an incorrect rear center seat belt assembly buckle. The misbuild involved fitting a buckle for another market with the…
-
96V248001Dec 12
Rear/other · ISUZU MOTORS LIMITED
Certain vehicles were manufactured with an incorrect rear center seat belt assembly buckle. The misbuild involved fitting a buckle for another market with the…
-
96V247000Dec 12
Hinge and attachments · RANGE ROVER NA., INC.
The right front door CAN fail to latch fully when closing, causing the door to "bounce" back off the door seals.
-
96V245000Dec 10
Lugs/nuts/bolts/studs · GENERAL MOTORS CORP.
The wheel lug nuts were not tightened to the proper specification during assembly.
-
96V244000Dec 5
Air bags · LOTUS CARS OF AMERICA INC
Air bag and seat belt system warning labels are missing from the sun visor. This does not comply with fmvss no. 108, "occupant crash protection."
-
96V233004Dec 2
Suspension rear · VOLVO TRUCKS NORTH AMERICA INC
Vehicle description: class 8 heavy duty vehicles equipped with eaton drive axles and axilok spindle nuts. The drive axle housings consist of a plate steel…
November 1996
-
96V242000Nov 27
Warning light/devices · ASTON MARTIN
The front seat belt warning chime does not sound with the seat belt unbuckled.
-
96V241000Nov 27
Unknown or other · ASTON MARTIN
The low brake fluid level warning lamp does not illuminate during the ignition on, bulb test period.
-
96V230000Nov 18
Steering wheel/handle bar · CHRYSLER CORPORATION
If the plastic pins and metal clip that retain the lower steering shaft in the upper shaft break, the lower steering shaft CAN separate from the upper shaft.
-
96V229000Nov 18
Steering wheel/handle bar · CHRYSLER CORPORATION
The steering wheel armature stamping CAN crack and separate from the center hub attachment to the steering column.
-
96V228000Nov 18
Hoses, lines/piping, and fittings · CHRYSLER CORPORATION
The fuel and rear brake tubes CAN experience accelerated corrosion between the tubes and a rubber isolator.
-
96V234000Nov 14
Tank assembly · GENERAL MOTORS CORP.
Vehicle description: 4-door, 4-wheel drive and all-wheel drive multi-purpose passenger vehicles. During development testing, the prop shaft contacted the…
-
96V231000Nov 12
Frontal · FORD MOTOR COMPANY
Two bolts that attach the driver air bag to the steering wheel were not installed during vehicle assembly.
-
96V226000Nov 4
Seats · GENERAL MOTORS CORP.
The recliner mechanism and the seat frame may have foam and/or vinyl vetween them, creating a "soft" joint. This "soft" joint results in lower than specified…
-
96V219000Nov 4
Retractor · GENERAL MOTORS CORP.
These vehicles were manufactured with seat belt retractors out of design position which CAN cause the retractor to lock-up on slopes less severe than the fmvss…
October 1996
-
96V212000Oct 30
Tank assembly · GENERAL MOTORS CORP.
During assembly of the left rear quarter panel, some welds were missed. This does not comply with the requirements of fmvss no. 301, "fuel system integrity."
-
96V215000Oct 29
Master cylinder · CHRYSLER CORPORATION
The master cylinder rear seal, between the hydraulic fluid and the vacuum reservoir, may not seal adequately allowing hydraulic fluid to be drawn into the…
-
96V214000Oct 28
Conventional · FORD MOTOR COMPANY
The parking brake systems may not hold the vehicles on a 20% grade with foot pedal efforts of 125 pounds or less. This does not meet the requirements of fmvss…
-
96V211000Oct 28
Frontal · GENERAL MOTORS CORP.
During deployment of the passenger air bag, the air bag fabric CAN snag on a reinforcement inside the instrument panel, causing the expanding air bag to lift…
-
96V207000Oct 18
Anchorage · FERRARI NORTH AMERICA
The passenger side seat belt mechanism which is fitted with the child safety seat locking mechanism was fitted on the driver side and the driver's side seat…
-
96V203000Oct 17
Mounting · FORD MOTOR COMPANY
The four rubber fuel line connector hoses that are supplied to ford with the fuel tank assembly were improperly manufactured. These hoses CAN develop cracks or…
-
96V199000Oct 11
Vehicle speed control · VOLVO CARS OF NA, INC.
The screws which attach the throttle plate to its axle (shaft) CAN loosen allowing the throttle plate to come in contact with the throttle housing.
-
96V185000Oct 10
Buckle assembly · NISSAN NORTH AMERICA, INC.
Certain buckle assemblies were produced with a "buckle base" that was improperly heat treated. This CAN cause the "buckle base" to be brittle failing to comply…
-
96V196000Oct 8
Seats · GENERAL MOTORS CORP.
The seat cover trim material does not meet the flammability requirements of fmvss no. 302, "flammability of interior materials."
-
96V195000Oct 8
Shaft sector · GENERAL MOTORS CORP.
The intermediate steering shaft loosens AT the steering shaft to steering gear coupling. With this looseness, the yoke pinch bolt CAN wear on the splines of…
-
96V143003Oct 8
Hoses, lines/piping, and fittings · CHRYSLER CORPORATION
Under conditions of full lock steering and full suspension travel, the left or right front wheel-side brake hose CAN crack, resulting in brake fluid leakage.
-
96V217000Oct 4
Air bags · AMERICAN HONDA MOTOR CO.
The supplemental restraint system (SRS) electronic control unit CAN cause the air bag to deploy unexpectedly.
-
96V193000Oct 2
Cables · FORD MOTOR COMPANY
The battery cable harness does not have adequate protection from contacting and being damaged by the right engine mount.
September 1996
-
96V178002Sep 27
Seats · AM GENERAL CORPORATION
Vehicle description: buses equipped with isringhausen seats in the driver position. Two welds located on the back rest adjustment side of the seat frame did…
-
96V187000Sep 26
Linkages · GENERAL MOTORS CORP.
The steering linkage assemby contains a relay rod tapered-stud attachment nut that was not torqued to proper specifications.
-
96V186000Sep 26
Fuses and circuit breakers · GENERAL MOTORS CORP.
Water intrusion into the kick panel areas in front of both the driver and passenger doors CAN cause a corrosion path between the battery feed and the…
-
96V184000Sep 25
Master cylinder · FORD MOTOR COMPANY
The retainer clip that holds the master cylinder push rod to the brake pedal arm is missing.
-
96V175000Sep 19
Visibility · MERCEDES-BENZ USA, INC.
If one of the headlamp wiper arms becomes misaligned, the wiper balde CAN lodge in the groove under the headlamp. If the washers are activated with the wiper…
-
96V176000Sep 18
Automatic transmission · FORD MOTOR COMPANY
The automatic transmission park pawl shaft may not be free to rotate as intended. If the park pawl shaft does not rotate, it would prevent the park pawl from…
-
96V170003Sep 17
Anchorage · AMERICAN HONDA MOTOR CO.
The latch plate used in the seat belt buckle was not manufactured according to design dimensions. If the seat belt tongue is inserted slowly AT an angle into…
-
96V170002Sep 17
Buckle assembly · ISUZU MOTORS LIMITED
The latch plate used in the seat belt buckle was not manufactured according to design dimensions. If the seat belt tongue is inserted slowly AT an angle into…
-
96V173000Sep 16
Webbing · MAZDA (NORTH AMERICA),INC
The rail of the automatic shoulder belt CAN wear sufficiently such that the cable which retracts the buckle assembly will become jammed in the rail rendering…
-
96V170001Sep 10
Buckle assembly · NISSAN NORTH AMERICA, INC.
The latch plate used in the seat belt buckle was not manufactured according to design dimensions. If the seat belt tongue is inserted slowly AT an angle into…
-
96V172002Sep 6
Webbing · FORD MOTOR COMPANY
Note: passenger side (right) seat belt assembly. The rail of the automatic shoulder belt CAN wear sufficiently such that the cable which retracts the buckle…
-
96V172001Sep 6
Webbing · FORD MOTOR COMPANY
Note: driver's side (left) passive seat belt assembly. The rail of the automatic shoulder belt CAN wear sufficiently such that the cable which retracts the…
-
96V166000Sep 5
Gear position indication (prndl) · FORD MOTOR COMPANY
The park pawl abutment bracket has a sharp edge which CAN cause the parking pawl to hang up and not engage the park gear. This would allow the vehicle to move…
August 1996
-
96V161000Aug 29
Labels · FORD MOTOR COMPANY
The certification labels on the involved vehicles has incorrect rear tire inflation pressure designations. This does not comply with fmvss no. 120, "tire…
-
96V160000Aug 29
Windshield wiper/washer · GENERAL MOTORS CORP.
These vehicles were built with an incorrect wiper blade assembly (17" long instead of 22" long) on the driver's side. This does not comply with fmvss no. 104,…
-
96V158002Aug 27
Fuel system, gasoline · CHRYSLER CORPORATION
The fuel tank gaskets for the fuel pump and/or gauge unit gasket could have been incorrectly installed allowing fuel or fumes to escape.
-
96V158001Aug 27
Fuel system, gasoline · MITSUBISHI AMERICA
The fuel tank gaskets for the fuel pump and/or gauge unit gasket could have been incorrectly installed allowing fuel or fumes to escape.
-
96V157000Aug 27
Foundation components · VOLVO TRUCKS NORTH AMERICA INC
The rear most axle of the tandem axle set could have inoperable brakes on one or both wheels because the brake s-cam was incorrectly installed.
-
96V153000Aug 23
Seats · GENERAL MOTORS CORP.
The front passenger seats have less lock pawl engagement on the inboard fore/aft adjuster than specified. This does not comply with federal motor vehicle…
-
96V151000Aug 12
Fuel injection system · FORD MOTOR COMPANY
The fuel pressure regulator located on the fuel rail in the engine compartment has a vacuum diaphragm that was damaged during manufacture of the regulator.
-
96V143002Aug 12
Hoses, lines/piping, and fittings · MITSUBISHI CARIBBEAN
Under conditions of full lock steering and full suspension travel, the left or right front wheel-side brake hose CAN crack, resulting in brake fluid leakage.
-
96V147000Aug 8
Steering wheel/handle bar · PORSCHE CARS N.A. INC.
A part of the steering column upper universal joint cracked during the manufacturing process.
-
96V149000Aug 2
Hoses, lines/piping, and fittings · MAZDA (NORTH AMERICA),INC
Oil mist contained in the engine intake air CAN collect over time in the brake vacuum check valve preventing the check valve from opening AT the specified…
-
96V146000Aug 1
Frame and members · FORD MOTOR COMPANY
The crossmember frame gussets were installed with undersized threaded fasteners following a breakdown of the production rivet gun that is generally used. This…
July 1996
-
96V142000Jul 31
Rear/other · GENERAL MOTORS CORP.
These vehicles exhibit a condition in which a rear seat belt buckle release button CAN stick in the unlatched (down) position under certain conditions because…
-
96V143001Jul 25
Hoses, lines/piping, and fittings · MITSUBISHI AMERICA
Under conditions of full lock steering and full suspension travel, the left or right front wheel-side brake hose CAN crack, resulting in brake fluid leakage.
-
96V140000Jul 23
Filler pipe and cap · ALFA ROMEO, INCORPORATED
The rubber fuel filler pipe CAN become brittle and allow fuel to leak.
-
96V136000Jul 18
Integrated child seat · CHRYSLER CORPORATION
The bolts which secure the integrated child seat modules to the seat frame CAN break.
-
96V135000Jul 18
Linkages · FORD MOTOR COMPANY
The pitman arms were not fully lubricated AT the assembly plant. The "ball joint" AT the outer end of the pitman arm CAN become contaminated and corrode.
-
96V131000Jul 15
Accelerator pedal · KIA MOTORS AMERICA, INC.
The accelerator pedal assembly could bind or stick during operation.
-
96V129000Jul 10
Suspension front · TOYOTA MOTOR CO., LTD.
Under certain driving conditions, the front suspension support CAN crack leading to failure of the support.
-
96V128000Jul 8
Power window devices and controls · VOLKSWAGEN OF AMERICA,INC
The sheet metal panels of both rear doors have openings for the routing of the electrical window regulator wiring. The panel openings have sharp edges that CAN…
-
96V123000Jul 2
Power assist · CHRYSLER CORPORATION
The power brake booster vacuum hose was improperly installed on the intake manifold vacuum nipple.
-
96V121002Jul 2
Tank assembly · AMERICAN SUZUKI MOTOR CORP.
The fuel tank on these vehicles CAN become punctured by a fuel tank flange attachment reinforcement during rear-end collisions. This does not comply with the…
-
96V122000Jul 1
Vacuum · GENERAL MOTORS CORP.
These vehicles were assembled with one of the four brake booster tabs not properly located in the front of dash reinforcement assembly.
-
96V121001Jul 1
Tank assembly · GENERAL MOTORS CORP.
The fuel tank on these vehicles CAN become punctured by a fuel tank flange attachment reinforcement during rear-end collisions. This does not comply with the…
-
96V120000Jul 1
Conventional · GENERAL MOTORS CORP.
The auto-apply park brake (manual or auto application) does not always apply. If the park brake does not apply, the "service park brake" warning light will…
-
96V118000Jul 1
Steering wheel/handle bar · GENERAL MOTORS CORP.
The steering wheel center hub to spoke weld CAN fracture.
-
96V117000Jul 1
Tires bead · GENERAL MOTORS CORP.
These tires have bead damage which occured during tire mounting.
-
96V116000Jul 1
Fuel injection system · GENERAL MOTORS CORP.
A backfire during engine starting CAN cause breakage of the upper intake manifold.
-
96V115000Jul 1
Cooling system · VOLKSWAGEN OF AMERICA,INC
In the event the engine overheats and the vehicle is operated continuously in that condition, the coolant pressure will rise to a level AT which the heat…
-
96V114000Jul 1
Seats · FORD MOTOR COMPANY
The four fasteners securing the driver's seat to the floorpan were not torqued to proper specifications.
-
96V113000Jul 1
Lower arm · HYUNDAI MOTOR AMERICA
Through contact with road hazards and curbs, the lower control arm assembly CAN shift from its original position.
-
96V111000Jul 1
Switch · BAYERISCHE MOTOREN WERKE
The brake light switch CAN fail allowing the switch to remain in the "brake lights off" position or in the "brake lights on" position.
-
96V110000Jul 1
Frontal · BAYERISCHE MOTOREN WERKE
The air bag contact ring locking tab located in the steering wheel assembly CAN break without warning.
June 1996
-
96V109000Jun 24
Rear/other · FORD MOTOR COMPANY
The elr/alr feature is used to accommodate child restraints. When servicing the rear belt assemblies, wrong parts could have been used which do not contain the…
-
96V108000Jun 20
12v/24v/48v battery · RANGE ROVER NA., INC.
The "hazardous substance label" warning was not installed on the batteries in these vehicles.
-
96V107000Jun 20
Sensor/control module-inactive · TOYOTA MOTOR CO., LTD.
If liquid is spilled in the console box area, the air bag warning light CAN illuminate and stay "on" during normal driving conditions.
-
96V106000Jun 18
Hoses, lines/piping, and fittings · AMERICAN HONDA MOTOR CO.
A soapy lubricant was used to insert the check valve into the vacuum hose which causes the brake booster check valve to stick.
-
96V099000Jun 13
Antilock/traction control/electronic limited slip · CHRYSLER CORPORATION
The ABS hydraulic control unit CAN experience excessive brake actuator piston seal wear causing pump-motor deterioration.
-
96V094000Jun 13
Gear box (other than rack and pinion) · CHRYSLER CORPORATION
The frame CAN crack AT the steering gear attachment and/or the steering gear mounting bolts CAN fracture.
-
96V098000Jun 12
Labels · TOYOTA MOTOR CO., LTD.
The sticker required by part 575, "consumer information regulations" to alert the driver of "the particular handling and maneuvering characteristics of utility…
-
96V089002Jun 4
Seats · NISSAN NORTH AMERICA, INC.
An out-of-specification condition in the seat cable roller pulley assembly CAN allow the cable that connects the seat adjust lever to the latch to be pinched…
-
96V092000Jun 3
U-bolt, leaf spring to axle · GENERAL MOTORS CORP.
One of the four rear axle u-bolts CAN break. This CAN potentially lead to the spring lifting from the axle under certain rebound, braking or cornering…
-
96V090000Jun 3
Air bags · FORD MOTOR COMPANY
The supplementary air bag inflatable restraint caution label located on the driver side sun visor does not contain the statement, "do not install rearward…
-
96V089001Jun 3
Seats · FORD MOTOR COMPANY
An out-of-specification condition in the seat cable roller pulley assembly CAN allow the cable that connects the seat adjust lever to the latch to be pinched…
May 1996
-
96V088000May 23
Electrical system horn · VOLKSWAGEN OF AMERICA,INC
The horn CAN work only intermittently due to insufficient electrical ground contact.
-
96V086000May 14
Automatic transmission · FORD MOTOR COMPANY
The park pawl shaft was improperly positioned when the roll pin that retains it was installed during transmission assembly. If the shaft was not properly…
-
96V084000May 10
Vehicle speed control · VOLKSWAGEN OF AMERICA,INC
A bushing which guides the cruise control rod CAN, over time, deteriorate and cause the control rod to bind.
-
96V083000May 9
Anchorage · NISSAN NORTH AMERICA, INC.
A harness connector protector located near the seat belt pre-tensioner CAN ignite due to the proximity to the combustion gas generated by the pre-tensioner…
-
96V082000May 7
U-bolt, leaf spring to axle · GENERAL MOTORS CORP.
The four u-bolts nuts on either side of the rear axle were under-torqued.
-
96V077000May 3
Anchorage · SAAB CARS USA, INC.
During static testing of belt anchorage points, the outboard attachment plate being used in the testing deformed and detached from the seat anchorage. This…
-
96V075000May 3
Master cylinder · CHRYSLER CORPORATION
The brake master cylinder CAN leak brake fluid due to a damaged double lip rear piston seal.
-
96V074000May 2
Antilock/traction control/electronic limited slip · CHRYSLER CORPORATION
Corrosion of the ABS hydraulic control unit CAN cause the solenoid valves to stick in the open position.
April 1996
-
96V071000Apr 25
Ignition · FORD MOTOR COMPANY
The ignition switch could experience an internal short circuit.
-
96V070000Apr 22
Doors latch · FORD MOTOR COMPANY
When in the secondary latched position, the driver door latches may open when subjected to transverse loads less than that specified in fmvss no. 206, "door…
-
96V069000Apr 19
Hoses, lines/piping, and fittings · GENERAL MOTORS CORP.
The left front brake line CAN contact the transaxle mounting bracket or attachment bolt.
-
96V064000Apr 16
Seats · FORD MOTOR COMPANY
The wire harness for the power lumbar feature on the seat is underneath the front seat cushion support wires. The support wires on the driver seat CAN contact…
-
96V060000Apr 8
Air bags · CHRYSLER CORPORATION
The air bag electronic control module (aecm) software contains an error which CAN delay the air bag deployment in certain crash situations.
-
96V058000Apr 4
Engine · MERCEDES-BENZ USA, INC.
The drive belt pulley on the engine CAN develop fatigue cracks in the metal and break. If the drive pulley breaks, the car would not have engine cooling,…
-
96V057000Apr 4
Vehicle speed control · GENERAL MOTORS CORP.
These vehicles were assembled with the throttle cable contacting the dash mat which could bind the throttle. This does not meet with the maximum return times…
-
96V059001Apr 3
Headlights · ISUZU MOTORS LIMITED
A brazilian domestic headlamp was inadvertently installed on these vehicles instead of the required u.s. Domestic assembly. This does not meet the requirements…
March 1996
-
96V095000Mar 23
Service brakes, air · VOLVO TRUCKS NORTH AMERICA INC
The traction solenoid exhaust CAN be obstructed due to inadequate drainage and a build-up of road contamination between the mounting bracket and the solenoid…
-
96V049000Mar 12
Accelerator pedal · AM GENERAL CORPORATION
The coating used to protect the accelerator pedal shaft is incompatible with the bronze bushing through which the shaft passes. Over time, and in the presence…
-
96V050000Mar 11
Suspension rear · RANGE ROVER NA., INC.
The rear radius arm, which locates the rear axle, CAN fail AT the extruded aluminum chassis eye end.
-
96V045000Mar 5
Anchorage · FORD MOTOR COMPANY
The rivets holding the rear outboard belt d-rings were not heat treated properly causing the heads of the rivets to fracture under load and fail to hold the…
-
96V044000Mar 5
Buckle assembly · GENERAL MOTORS CORP.
These vehicles were assembled with one or more incorrect safety belt and/or safety belt buckle ends. This does not conform with the requirements of fmvss no.…
February 1996
-
96V024002Feb 28
Hydraulic · MAZDA (NORTH AMERICA),INC
The studs which attach the brake master cylinder to the power brake vacuum booster assembly CAN develop stress corrosion cracking after being operated for an…
-
96V038000Feb 22
Linkages · VOLVO TRUCKS NORTH AMERICA INC
Vehicle description: heavy duty class 8 vehicles built with a volvo 5.7 (12,500 lbs) front steering axle. Due to hydrogen embrittlement, the front steering…
-
96V035000Feb 22
Manual transmission · GENERAL MOTORS CORP.
Some of these trucks were built with transmissions containing parts which were not machined to GM's specifications.
-
96V034000Feb 22
Gear box (other than rack and pinion) · NISSAN NORTH AMERICA, INC.
Due to the type of lubricant used in the steering transfer gear assembly, the effort required to turn the steering wheel AT low ambient temperatures (less than…
-
96V031000Feb 22
Pedals and linkages · NISSAN NORTH AMERICA, INC.
Due to the thickness of the carpet padding on the transmission tunnel, the space between the brake pedal and the transmission tunnel could catch a driver's…
-
96V037000Feb 20
Tail lights · TOYOTA MOTOR CO., LTD.
The plastic material of the bulb holders of the rear tail light assembly does not have sufficient heat resistance. When the bulb is illuminated, the resulting…
-
96V032000Feb 12
Air suspension system · VOLVO TRUCKS NORTH AMERICA INC
The rear suspension axle retention plate CAN break under normal use, affecting axle alignment.
-
96V027000Feb 5
Labels · CHRYSLER CORPORATION
The involved vehicles have tire/wheel specification information on the vehicle certification label which indicates a smaller size tire than required. This does…
-
96V026000Feb 5
Front underhood · CHRYSLER CORPORATION
An engine wiring harness CAN short circuit due to contact with the exhaust gas recirculation tube..
-
96V024001Feb 5
Hydraulic · FORD MOTOR COMPANY
The studs which attach the brake master cylinder to the power brake vacuum booster assembly CAN develop stress corrosion cracking after being operated for an…
January 1996
-
96V020000Jan 31
Suspension rear · GENERAL MOTORS CORP.
The rear lower control arm CAN crack AT the rear stabilizer bar attachment.
-
96V019000Jan 30
Lower ball joint · GENERAL MOTORS CORP.
Defective lower control arm ball joint attachment nuts were not properly torqued and CAN loosen.
-
96V018000Jan 30
Lower ball joint · GENERAL MOTORS CORP.
Defective lower control arm ball joint attachment nuts were not properly torqued and CAN loosen.
-
96V017000Jan 29
Switch · VOLKSWAGEN OF AMERICA,INC
Defective ignition switches were improperly manufactured and CAN cause some electrical accessories to malfunction.
-
96V016000Jan 25
Brake fluid low warning lamp · FORD MOTOR COMPANY
The brake system fluid level indicator lamp switch CAN malfunction. This does not comply with fmvss no. 105, "hydraulic brake systems."
-
96V015000Jan 23
Cooling unit and lines · GENERAL MOTORS CORP.
Vehicle description: passenger vehicles manufactured from august 1991 through july 1995. The transmission oil cooler line CAN separate when the vehicle is…
-
96V009000Jan 23
Exterior lighting · FORD MOTOR COMPANY
A defective control module in the "autolamp" system CAN malfunction. If the "autolamp" system is being used to activate the exterior light (including…
-
96V008000Jan 23
Steering wheel/handle bar · SAAB CARS USA, INC.
The steering column shaft was incorrectly installed in the vehicle causing the column to be out of alignment.
-
96V013000Jan 17
Rack and pinion rack · FERRARI NORTH AMERICA
Defective left steering rack mounting supports were improperly heat treated resulting in the possible fracturing of the support.
-
96V007000Jan 16
Air conditioner · FORD MOTOR COMPANY
Under certain conditions, the climate control blower does not operate as intended. The blower could (1) stick on "high;" (2) operate erratically with blower…
-
96V005000Jan 16
Cooling system fan · GENERAL MOTORS CORP.
The engine cooling fan assemblies CAN break from fatigue caused by engine and/or vehicle induced stresses.
-
96V002000Jan 16
Filler pipe and cap · CHRYSLER CORPORATION
A static electric charge CAN build up on the ungrounded metal section of the fuel filler tube.
-
96V006000Jan 11
Gasoline · CHRYSLER CORPORATION
In certain vehicles, the engine cylinder head oil galley plug does not seal properly and engine cylinder head oil is not adequately retained.
-
96V004000Jan 2
Steering wheel/handle bar · GENERAL MOTORS CORP.
The steering column upper intermediate-shaft nut may not be torqued to proper specifications. The nut could loosen and detach allowing the through-bolt that…
-
96V003000Jan 2
Gear position indication (prndl) · GENERAL MOTORS CORP.
The instrument panel cluster trim plate/bezel CAN sag and cover the light emitting diode portion (lighted pointed above panel) of the transaxle shift indicator…