Acura · CL

1998 Acura CL Recalls

Subcompact car · FWD · Regular

There are 5 safety recalls on file for the 1998 Acura CL, filed between February 1998 and January 2020. Each one is repaired free by a franchised Acura dealer, no matter how old the car is or who owns it now.

A recall covers a range of build dates, so not every 1998 CL is affected by every campaign below. To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.

2020 (1)

20V026000 Filed Jan 17, 2020 1,439,841 vehicles

Inflator module

Honda (American Honda Motor Co.) is recalling certain 1998 Acura 2.2CL, 1998-1999 Acura 2.3CL, 1998-1999 Acura 3.0CL, 2001 Acura 3.2CL and Acura MDX, 1998-2000 Honda Accord Coupe, Accord Sedan, Civic Sedan, Odyssey and Acura 3.5RL, 1999-2000 Acura 3.2TL, 1996-2000 Civic Coupe, 1997-2000 CR-V, 1997-1998 EV Plus, and 1998-1999 Isuzu Oasis vehicles. These vehicles were equipped with Non-Azide Driver air bag Inflators (NADI) and do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.

Risk and remedy
Risk
In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag cushion may not properly protect the occupant. These scenarios increase the risk of serious injury or death.
Remedy
Honda will notify owners, and dealers will inspect the driver frontal air bag inflator, and replace it if necessary, with an inflator of a different design, free of charge. The recall began October 1, 2020. Owners may contact American Honda's Customer Support & Campaign Center at 1-888-234-2138 or Isuzu customer service at 1-800-255-6727.
Filed by
Honda (American Honda Motor Co.) (manufacturer number D8J, Z8G)

2003 (1)

03V423000 Filed Oct 27, 2003 563,861 vehicles

Switch

On certain passenger vehicles and mini vans, the ignition switch may wear excessively and prevent proper interlock operation, making it possible to turn the ignition key to the "off" position and remove the key without shifting the transmission to "park."

Risk and remedy
Risk
If the vehicle operator does not shift to "park" before removing the key and fails to engage the parking brake, the vehicle could roll and a crash could occur.
Remedy
Dealers will perform an inspection procedure that determines the amount of cylinder body wear. If significant wear is indicated, the dealer will replace the cylinder body, collar, and latch plate. If no signs of wear are indicated, dealers will replace the latch plate with a redesigned part. Owner notification began december 8, 2003. Owners should contact honda AT 1-800-999-1009 or acura AT 1-800-382-2238.
Filed by
AMERICAN HONDA MOTOR CO. (manufacturer number 03-088/03-034)

2002 (1)

02V120000 Filed May 16, 2002 1,000,000 vehicles

Switch

On certain sedans, coupes, hatchbacks, and sport utility vehicles, electrical contacts in the ignition switch CAN degrade due to the high electrical current passing through the switch when the vehicle is started.

Risk and remedy
Risk
Worn contacts could cause the engine to stall without warning, increasing the risk of a crash.
Remedy
Dealers will replace the ignition switch. Owner notification began june 14, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact honda AT 1-800-999-1009 or acura AT 1-800-382-2238.
Filed by
AMERICAN HONDA MOTOR CO.

1999 (1)

99V069000 Filed May 10, 1999 124,875 vehicles

Lower ball joint

Vehicle description: passenger vehicles. Certain vehicles were manufactured with ball joints that CAN prematurely wear out and, in the worse case, the ball joint would separate causing the front suspension to collapse.

Risk and remedy
Risk
This condition would result in vehicle deceleration and a sudden loss of power. Also steering controllability would be reduced.
Remedy
Dealers will replace the front suspension lower ball joints.
Filed by
AMERICAN HONDA MOTOR CO.

1998 (1)

98V018000 Filed Feb 10, 1998 33,966 vehicles

Park/neutral start interlock switch

Vehicle description: passenger vehicles (honda accord sedans manufactured from september 18, 1997 to january 10, 1998; coupes manufactured december 11, december 15, 1997, and january 5, 1998; acura 2.3cl manufactured october 22, 1997 through january 7, 1998). During manufacturing, the casting die caused an irregularity in the right-side transmission cover. This irregularity CAN limit the movement of the parking pawl actuation level and prevent adequate engagement of the parking gear pawl. This does not comply with fmvs no. 114, "theft protection."

Risk and remedy
Risk
This condition CAN cause the vehicle to roll down an incline when the transmission is locked in "park," increasing the risk of personal injury and/or property damage.
Remedy
Dealers will install a collar on the transmission parking pawl to ensure proper movement of the actuation lever.
Filed by
AMERICAN HONDA MOTOR CO.

Recall questions

How many recalls does the 1998 Acura CL have?

NHTSA lists 5 recalls for the 1998 Acura CL.

How do I know if my car's recall was fixed?

Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.