Owners of the 1994 BMW 530i have reported 5 engine problems to NHTSA, 56% of all complaints about this model year.
Where owners named a specific part, the most common were engine (3) and cooling system (3).
Complaints were filed between October 1997 and May 2009.
For comparison, the 2006 530i has the most engine complaints of any year, with 23.
Engine and cooling: stalling, loss of power, oil consumption, overheating, knocking, failed internal parts and check-engine faults traced to the engine.
1 recall for this model year involves the engine.
If your problem matches, a dealer repairs it free under the recall.
Complaints5
Typical mileagen/a
Crashes / fires0 / 0
Injuries0
Parts named in these complaints
Engine3
Cooling System3
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
EngineFiled May 2009PA
1994 BMW 530i engine's fan clutch seized causing the fan to shatter violently. *nj the failure of the fan clutch caused extensive amounts of damage to many components in the engine bay.
Owner complaint 10269249 filed with NHTSA
EngineFiled Jan 2000CT
BMW was aware of a problem where sulpher from US fuels was causing the cylinder walls of the m60 v8 motor to deteriorate. Apparently they used a new metal called nikasil (aluminum impregnated with nickel and silicone). Once the cylinder walls become damaged, the piston rings CAN no longer seal properly, causing "leakdown" or air to escape past the piston as it attempts to compress air into the combustion chamber. Although BMW knew of the defect, there was no recall issued. Through reasearch, and talks with BMW mechanics, I found that BMW has replaced thousands of the effected motors.
Vehicle description: passenger vehicles. A malfunction or failure of a coolant system component, such as a thermostat, water pump, or fan belt, CAN result in significantly increased coolant temperature and system pressure. If the indications of a critical overheating condition is not noticed by the driver, it is possible that damage to, or failure of, a coolant system component could occur.
Risk and remedy
Risk
If a crack were to form or a seam were to separate in the heater core end piece, hot coolant could suddenly be expelled, increasing the risk of personal injury to a vehicle occupant.
Remedy
Dealers will install a new design radiator cap to control pressure and provide greater coolant overflow in the event of overheating.