Owners of the 2020 BMW X3 have reported 27 engine problems to NHTSA, 25% of all complaints about this model year.
The typical report came at around 21,000 miles, and complaints were filed between April 2021 and October 2026.
These engine complaints include 5 fires.
For comparison, the 2013 X3 has the most engine complaints of any year, with 159.
Engine and cooling: stalling, loss of power, oil consumption, overheating, knocking, failed internal parts and check-engine faults traced to the engine.
1 recall for this model year involves the engine.
If your problem matches, a dealer repairs it free under the recall.
Complaints27
Typical mileage21k
Crashes / fires0 / 5
Injuries0
What owners say
EngineFiled Oct 2026IL
I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019â2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely.
Owner complaint 11769770 filed with NHTSA
EngineFiled Jul 2026NH
Heat Management Module HMM is bad. BMW used a plastic part that is right up against the engine block. This HMM Heat Management Module resulted in STOPPING the vehicle completely in the middle of the freeway. I had no control. Then the car drove, then stopped again. I had NO CONTROL over the vehicle. Weeks later the Drivetrain Malfunction warning light appeared as i was driving home late at night from the ER. I took it to my BMW dealer. The diagnostic test was performed and was told the Heat Management Module HMM needed to be replaced at a cost to me of $3000. I contacted BMW USA, explained what transpired and they responded with a denial.
Owner complaint 11749367 filed with NHTSA
EngineFiled Jun 2026FL
I own a 2020 BMW X3 M40i, VIN [XXX], manufactured November 2019, now at approximately 100,000 miles, equipped with the B58TU engine. My oil level sensor stopped completing measurements at approximately 45,000 miles, a known precursor to thermoplastic oil pump failure. For 55,000 miles I had no way to identify whether my vehicle contained the defective component because BMW removed the original thermoplastic part number from all dealer networks. VIN-based lookup now falsely returns updated metal component information regardless of what is physically present in the vehicle.
BMW of North America, LLC (BMW) is recalling certain 2020 M340i, M340i xDrive, 540i, 540i xDrive, X3 M40i, 2020-2021 X4 M40i, 745Le xDrive, 2019-2021 Z4 M40i, and 2020-2021 Toyota Supra vehicles. During engine start, the engine management software may cause loss of braking assist. Full mechanical braking (without assist) remains available.
Risk and remedy
Risk
Loss of braking assist can increase the risk of a crash.
Remedy
Dealers will update the engine management software, free of charge. Owner notification letters were mailed on September 17, 2021. Owners may contact BMW customer service at 1-800-525-7417.