There are 6 safety recalls on file for the 1995 Chevrolet Blazer,
filed between December 1994 and July 1999.
Each one is repaired free by a franchised Chevrolet dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 1995 Blazer is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
1999 (1)
99V193000
Filed Jul 19, 1999 1,125,749 vehicles
Vehicle description: certain 4-wheel drive pickup trucks and sport utility vehicles equipped with ABS (antilock braking system) manufactured from september 1989 through august 1996. Under certain driving conditions the switch which signals the ABS system whether the vehicle is in 2-wheel or 4-wheel drive CAN malfunction causing increased stopping distances during ABS stops while in the two-wheel drive mode.
Risk and remedy
- Risk
- If this occurred AT a time when minimum stopping distance was required, a vehicle crash could occur without prior warning.
- Remedy
- Dealers will replace or repair the 4-wheel/2-wheel drive switch.
- Filed by
- GENERAL MOTORS CORP. (manufacturer number 99041)
1998 (1)
98V150001
Filed Jul 1, 1998 1,557,585 vehicles
Vehicle description: light duty pickup trucks and sport utility vehicles, 2 and 4-wheel drive. Solder joints near the wiring harness connector CAN crack causing the windshield wipers to work intermittently.
Risk and remedy
- Risk
- This condition CAN result in inoperative wipers, reducing a driver's visibility, and increasing the risk of a vehicle crash.
- Remedy
- Dealers will replace the wiper motor circuit board and cover.
- Filed by
- GENERAL MOTORS CORP. (manufacturer number 98043)
1996 (1)
96V234000
Filed Nov 14, 1996 432,183 vehicles
Vehicle description: 4-door, 4-wheel drive and all-wheel drive multi-purpose passenger vehicles. During development testing, the prop shaft contacted the inboard side of the fuel tank allowing fuel leakage. This leakage was in excess of the amount permitted by fmvss 301, "fuel system integrity."
Risk and remedy
- Risk
- If an ignition source is present, and there is a fuel leak, a fire could occur.
- Remedy
- Dealers will install additional shielding of the fuel tank. This will be added without removing or disassembling the fuel system.
- Filed by
- GENERAL MOTORS CORP.
1995 (2)
Fan blade rivet breakage CAN occur causing the fan blade to separate from the spider.
Risk and remedy
- Risk
- If this occurred while the hood was open, a person working under the hood of the vehicle or in the vicinity of the vehicle could be struck by the fan blade and injured.
- Remedy
- Dealers will inspect and replace, if necessary, the fan with a newer fan having thicker-headed rivets.
- Filed by
- GENERAL MOTORS CORP.
The upper ball joint nuts were under-torqued resulting in improper seating in the steering knuckle.
Risk and remedy
- Risk
- This condition CAN cause the ball joint stud to loosen, and fracture resulting in a loss of steering control.
- Remedy
- Dealers will retorque the upper ball joint nut on both sides of the vehicle to the correct torque values.
- Filed by
- GENERAL MOTORS CORP.
1994 (1)
The brake pedal pivot bolt was started in the weld nut, but was not torqued correctly causing the bolt to disengage from the weld nut.
Risk and remedy
- Risk
- This condition CAN result in a total loss of brakingcapability.
- Remedy
- Dealers will inspect for hand-started brake pedal bolts and torque them to correct specifications.
- Filed by
- GENERAL MOTORS CORP.
Recall questions
How many recalls does the 1995 Chevrolet Blazer have?
NHTSA lists 6 recalls for the 1995 Chevrolet Blazer.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.