Owners of the 2004 Chevrolet Corvette have reported 36 steering problems to NHTSA, 17% of all complaints about this model year.
Where owners named a specific part, the most common were column locking (7), column (3), and linkages (1).
The typical report came at around 33,000 miles, and complaints were filed between July 2004 and April 2024.
These steering complaints include 3 crashes and 1 injury.
For comparison, the 1998 Corvette has the most steering complaints of any year, with 215.
Power steering pumps and electric assist, racks, columns, tie rods and sudden loss of steering assist.
2 recalls for this model year involve the steering.
If your problem matches, a dealer repairs it free under the recall.
Complaints36
Typical mileage33k
Crashes / fires3 / 0
Injuries1
Parts named in these complaints
Column Locking7
Column3
Linkages1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
SteeringFiled Aug 202275,000 milesAZ
The contact's friend owns a 2004 Chevrolet Corvette. The contact stated that while his friend was starting the vehicle, the steering wheel seized. The dealer was made aware of the failure but informed the contact that they were unable to assist due to the age of the vehicle. The vehicle was not diagnosed nor repaired. The manufacturer was not made aware of the failure. The contact related the failure to NHTSA Campaign Number: 04V060000 (Steering) however, the VIN was not included in the recall. The failure mileage was approximately 75,000.
Owner complaint 11476933 filed with NHTSA
SteeringFiled Mar 2021115,000 milesUT
While traveling down the freeway AT around 80 MPH on a straight flat surface, the Corvette sharply veered to the side as I heard a loud screech from one of the brakes it lasted for about a second. The turn was so abrupt I thought I was going to roll but after fishtailing was able to get things going straight. Immediately a service active handling system message popped up. Happened about a week later going about 60 MPH not quite as abrupt. This condition could have lead to a fatality.
Owner complaint 11404236 filed with NHTSA
SteeringFiled Oct 20196,890 milesNY
Tl* the contact owns a 2004 Chevrolet Corvette. While the vehicle was parked outside the garage and the ignition was started, the clutch was released and the vehicle seized. Also, the steering column lock warning message illuminated on the instrument panel. The contact associated the failure with NHTSA campaign number: 04v060000 (steering). The vehicle was not able to be driven. The contact called maguire Chevrolet cadillac of ithaca (located AT 35 cinema dr, ithaca, ny 14850, (607) 272-9292) and notified them of the failure. The vehicle was not diagnosed or repaired. The dealer and manufacturer were not notified.
On certain passenger vehicles involved in this campaign, the lower control arm ball stud nut/washer assemblies with washers were made of the wrong material. The washers may fracture and become loose or fall away from the vehicle, reducing clamp load. Separation of the control arm ball stud and steering knuckle, due to disengagement of the tapered attachment and retaining nut, is possible.
Risk and remedy
Risk
If the control arm separates from the knuckle, the affected corner of the vehicle will drop and the control arm would be forced downward, contacting the wheel. The affected wheel could tilt outward and create a dragging action that would tend to slow the vehicle and create a tendency for the vehicle to turn in the direction of the affected wheel. In extreme situations, the affected wheel assembly could separate from the vehicle. Separation of the wheel assembly would also sever that wheel;s hydraulic brake hose and result in diminished braking performance of the vehicle, which could result in a crash.
Remedy
Dealers will inspect the ball stud joints and measure the torque of the nut for all front lower control arms in all models affected as well as the rear lower control arms on the xlr and corvette. If the torque is not AT specification, the dealers will replace the ball stud, the knuckle, and the nut. If the torque is AT specification, the dealers will replace the nut/washer assembly only. The recall will begin on august 25, 2004. Owners should contact cadillac AT 1-866-982-2339 or chevrolet AT 1-800-630-2438.
On certain passenger vehicles equipped with electronic column lock systems (ecl), when the ignition switch is turned to "lock," the ecl system prevents turning of the steering system. When the vehicle is started, the ecl unlocks the steering system. The vehicle is designed so that if the column fails to unlock when the vehicle is started and the customer tries to drive, the fuel supply will be shut off so that the vehicle cannot move when the vehicle cannot be steered. If voltage AT the powertrain control module is low or interrupted, however, the fuel shut off may not occur and the vehicle CAN be accelerated while the steering system is locked. Also when the control system shows that the ecl is unlocked and the vehicle is being driven, the lock pin location CAN vary. Depending on the location of the lock plate relative to the switch transition point, there could then be contact between the lock plate and pin causing the steering to lock while driving .
Risk and remedy
Risk
If this occurs, a crash could occur without warning.
Remedy
On vehicles equipped with an automatic transmission, the dealer will disable the steering column lock by removing the column lock plate. When the ignition key is removed, the transmission shifter will lock but the steering column will not lock. On vehicles equipped with a manual transmission, the dealer will reprogram the powertrain control module, perform a dimensional check of the column lock and, if necessary, replace the lock plate. The steering column on these vehicles will continue to lock when the key is removed. Owner notification to owners of 1997 vehicles equipped with automatic transmissions began on april 26, 2004. Owners of 1998 through 2004 vehicles (except 1997-1998 manual transmission vehicles) will be notified beginning on august 2, 2004. The remaining owners (1997-1998 manual transmission vehicles) will be notified later in 2004, when parts are available. Owners should contact chevrolet AT 1-800-630-2438.