Owners of the 2013 Chrysler 200 have reported 102 electrical problems to NHTSA, 16% of all complaints about this model year.
Where owners named a specific part, the most common were instrument cluster/panel (1), wiring (1), and horn (1).
The typical report came at around 72,000 miles, and complaints were filed between September 2013 and June 2026.
These electrical complaints include 2 crashes, 1 fire, and 1 injury.
For comparison, the 2015 200 has the most electrical complaints of any year, with 755.
Batteries, alternators, wiring, fuses, ignition, instrument clusters, infotainment and body electronics, including warning lights and parasitic drain.
1 recall for this model year involves the electrical.
If your problem matches, a dealer repairs it free under the recall.
Complaints102
Typical mileage72k
Crashes / fires2 / 1
Injuries1
Parts named in these complaints
Instrument Cluster/Panel1
Wiring1
Horn1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Electrical systemFiled Jun 2026KY
The horn will honk sporadically and will not start at times then wipers will malfunction. Had tipm looked at was told it is normal for this to go out, bad design.
Owner complaint 11741997 filed with NHTSA
Electrical systemFiled Mar 2026120,000 milesMI
The contact owns a 2013 Chrysler 200. The contact stated that while driving at an undisclosed speed, the passengerâs side air bag unexpectedly deployed without the vehicle being in a crash. There was no warning light illuminated. Due to the failure, the passengerâs seat became inoperable and could not be adjusted or properly positioned. The dealer was contacted, but the vehicle was not diagnosed or repaired. The contact was informed that the vehicle would not be repaired due to a previous repair completed under NHTSA Campaign Number: 13V282000 (Electrical System, Air Bags). The manufacturer was made aware of the failure.
Owner complaint 11727212 filed with NHTSA
Electrical systemFiled Aug 2025FL
I started having the oil pressure warning light come on same day after an oil change. It was a 3-hour drive, and the light will come on while my foot is on the break. Oil level was in the safe marker. Then I started feeling rumbling like I was driving a stick shift car. One major incident I was waiting for my turn at a light and when it turned green, the car was stalling but went. All of sudden it stopped and cut off and wouldn't crank back up. When it did the light was red and cars were going around me. It was running hot but started back up for me to drive home. But it I stopped it shuts off.
Chrysler is recalling certain model year 2011-2013 Sebring and 200 vehicles manufactured June 28, 2011, through December 13, 2012; model year 2011-2013 Dodge Avenger vehicles manufactured June 25, 2011, through January 14, 2013; model year 2011-2012 Dodge Nitro vehicles manufactured June 17, 2011, through December 15, 2011; and model year 2011-2012 Jeep Liberty vehicles manufactured June 17, 2011, through August 15, 2012. Electrical over-stress of a resistor in the occupant restraint control module may lead to the non-deployment of the active head restraints during a rear impact collision.
Risk and remedy
Risk
In the event of a crash necessitating the deployment of the active head restraints , their non-deployment could increase the risk of injury.
Remedy
Chrysler will notify owners, and dealers will flash the Totally Integrated Power Module (TIPM) or replace the occupant restraint control module, as needed, free of charge. The recall began on November 19, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N38.