Dodge · Dakota

1997 Dodge Dakota Recalls

Full-size pickup · 4WD/AWD, RWD · Regular

There are 5 safety recalls on file for the 1997 Dodge Dakota, filed between May 1997 and May 2001. Each one is repaired free by a franchised Dodge dealer, no matter how old the car is or who owns it now.

A recall covers a range of build dates, so not every 1997 Dakota is affected by every campaign below. To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.

2001 (1)

01V153000 Filed May 8, 2001 216,100 vehicles

Air bags

Vehicle description: pickup trucks. Sound deadener material inside the steering wheel could become detached from the cover and housing. Note: the ram pickup trucks were built AT the warren assembly plant ("s" in the 11th VIN position) from may 16, 2000 through october 23, 2000; st. Louis north assembly plant ("j" in the 11th VIN position) from may 19, 2000 through october 23, 2000; lago alberto assembly plant ("m" in the 11th VIN position) from may 23, 2000 through october 23, 2000; and saltillo assembly plant ("g" in the 11th VIN position) from may 23, 2000 through october 23, 2000. Important: vehicles that have already had the proper clockspring installed, according to warranty records, have been excluded from this recall. In addition, 1997-2000 model year vehicles that have had a suspect replacement clockspring installed, according to warranty records, have been added to this recall.

Risk and remedy
Risk
When this occurs, the material could interfere with the clockspring ribbon and cause an open circuit. The driver air bag system will become disabled, and the air bag warning lamp will illuminate on the instrument panel.
Remedy
Dealers will replace the clockspring assembly. Owner notification began june 18, 2001. Also some 1997-200 model year vehicles that, according to warranty records, have had a suspect replacement clockspring installed, will also be included in this campaign. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact daimlerchrysler AT 1-800-853-1403.
Filed by
DAIMLERCHRYSLER CORPORATION (manufacturer number 982)

2000 (3)

00V199000 Filed Jul 17, 2000 91,610 vehicles

Hoses, lines/piping, and fittings

Vehicle description: pickup trucks with a 131 inch wheelbase. Some of these vehicles may have been built with inadequate clearance between the fuel line and the cab underbody.

Risk and remedy
Risk
This contact CAN result in wear, and after extended contact, could cause a perforation in the fuel line, resulting in leakage. Fuel leakage in the presence of an ignition source could result in a fire.
Remedy
Dealers will inspect the vehicles for proper clearance. Fuel lines that exhibit inadequate clearance will be replaced with a redesigned fuel line that will assure proper clearance.
Filed by
DAIMLERCHRYSLER CORPORATION (manufacturer number 892)
00V198000 Filed Jul 17, 2000 437,000 vehicles

Hoses, lines/piping, and fittings

Vehicle description: pickup trucks. Some vehicles may have been built with inadequate clearance between the rear axle vent hose and the brake hose.

Risk and remedy
Risk
A puncture in the rear brake hose will result in a loss of braking force AT the rear wheels.
Remedy
Dealers will inspect the rear brake hose for evidence of wear. Worn brake hoses will be replaced. The rear vent hose will be shortened by 3 inches and a clip will be installed to assure clearance between the axle vent line and brake hose is maintained.
Filed by
DAIMLERCHRYSLER CORPORATION (manufacturer number 891)
00V193000 Filed Jul 17, 2000 40,000 vehicles

Hoses, lines/piping, and fittings

Vehicle description: pickup trucks built with 2.5l engines. Some vehicles may have been built with inadequate clearance between the left front brake tube and the power steering hose.

Risk and remedy
Risk
A puncture of the left front brake tube CAN result in a loss of braking force AT the front wheels, increasing the risk of a crash.
Remedy
Dealers will inspect the brake tube and power steering hose for wear. If wear is evident, the brake tube and/or power steering hose will be replaced. A power steering standoff bracket will be installed on all vehicles to ensure that adequate clearance between the brake tube and power steering hose is maintained.
Filed by
DAIMLERCHRYSLER CORPORATION (manufacturer number 870)

1997 (1)

97V080000 Filed May 16, 1997 125,000 vehicles

Sensor/control module-inactive

The electrical circuit design allows the potential for an inadvertent air bag deployment upon vehicle ignition shut down.

Risk and remedy
Risk
Unexpected air bag deployment CAN result in occupant injury.
Remedy
Dealers will replace the air bag electronic control module with a newly designed module.
Filed by
CHRYSLER CORPORATION

Recall questions

How many recalls does the 1997 Dodge Dakota have?

NHTSA lists 5 recalls for the 1997 Dodge Dakota.

How do I know if my car's recall was fixed?

Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.