1996 Dodge Ram 1500 Suspension Problems
Full-size pickup · 4WD/AWD, RWD · Regular
Owners of the 1996 Dodge Ram 1500 have reported 27 suspension problems to NHTSA, 9% of all complaints about this model year.
Where owners named a specific part, the most common were front (20), rear (3), and multiple axle (1).
The typical report came at around 92,000 miles, and complaints were filed between January 1997 and August 2012.
For comparison, the 2006 Ram 1500 has the most suspension complaints of any year, with 106.
Springs, struts, shocks, control arms, ball joints, bushings and stabilizer links, front and rear.
Parts named in these complaints
- Front20
- Rear3
- Multiple Axle1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
I have a 1996 Dodge Ram 1500 4X4. My mileage is AT 85,020. I have taken real good care of this truck and I use it to drive in the snow when I need the 4 wheel drive. I was doing a oil change and I noticed the passinger side trailing arms and coil spring bracket welds are pulling away from the axle. I looked over to driver's side and the trailing arm welds on the front axle are cracked. I have a dana 3.5 axle ratio. The tag under the hood numbers are 3850 front axle dana 4. I purchased this truck thinking the frame and axles would last the life time of the truck. I'AM a navy veteran and a mechanic and I CAN repair mechanical equipment.
Was driving on highway AT 65 MPH, I crossed a small bump in the road and lost all control of the 1996 Dodge Ram 1500 4X4 pickup. It shook all the stuff off of my seat as well as my CD holder. This is the second time this has happened. I AM AT a loss as to how to look for the problem. I love this truck but I have gone through two wheel bearings and a tie rod end and I have only had it for a year.... I want to know how to fix this problem before someone gets killed.
1996 Ram 1500 sway bar attachment failed. *ts the consumer stated when the sway bar fell to the ground, it caused the front wheels to rapidly go from full-left to full right AT the rate of several times per second. Subsequent inspection showed that the sway bar plate had never been machine welded to the frame and for several years had been held on only by three small spot welds, meant to hold the plate in place for the machine welder. The machine weld appeared to be about an eighth to a sixteenth of an inch off, missing the entire plate.
Suspension complaints across Ram 1500 years
Questions about suspension problems
How common are suspension problems on the 1996 Dodge Ram 1500?
27 owners have reported suspension problems to NHTSA, 9% of all complaints for this model year.