Dodge · Ram 1500

2010 Dodge Ram 1500 Transmission and drivetrain Problems

Full-size pickup · 4WD, RWD · Regular

Owners of the 2010 Dodge Ram 1500 have reported 229 transmission problems to NHTSA, 47% of all complaints about this model year.

Where owners named a specific part, the most common were driveline (10), automatic transmission (2), and transfer case (4-wheel drive) (1).

The typical report came at around 60,000 miles, and complaints were filed between November 2010 and August 2026.

These transmission complaints include 12 crashes, 1 fire, and 4 injuries.

For comparison, the 2005 Ram 1500 has the most transmission complaints of any year, with 594.

Automatic and manual transmissions, CVTs, clutches, axles, driveshafts and transfer cases: harsh or delayed shifts, slipping, shuddering and rolling away in park.

3 recalls for this model year involve the transmission. If your problem matches, a dealer repairs it free under the recall.
Complaints229
Typical mileage60k
Crashes / fires12 / 1
Injuries4

Parts named in these complaints

  • Driveline10
  • Automatic Transmission2
  • Transfer Case (4-Wheel Drive)1

Owners choose these labels when they file, so they are a guide rather than a diagnosis.

What owners say

Transmission and drivetrain Filed Aug 2026 262,420 miles OH

The contact owns a 2010 Dodge Ram 1500. The contact stated while driving at an undisclosed speed, the driveshaft detached. No warning lights were illuminated. The contact received notification for NHTSA Campaign Number: 13V038000 (Power Train) however, the part to complete the recall repair was not yet available. The vehicle was towed to a dealer, where it was diagnosed that the rear axle pinion nut needed to be replaced. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The vehicle was not repaired. The manufacturer was notified of the failure.

Owner complaint 11760355 filed with NHTSA
Transmission and drivetrain Filed Nov 2025 WA

During unrelated work, a mechanic discovered the retaining ring for recall N08 (rear axle pinion nut) was not installed and the pinion nut was loose enough to turn by hand. He stated the recall had either been performed incorrectly or not at all, and that the vehicle was unsafe to drive. The recall shows “completed” in 2013, but the defect is still present. I contacted Stellantis Customer Care, submitted photos, and they confirmed in writing that if the defect still exists, the recall must be performed free of charge regardless of age, mileage, or ownership.

Owner complaint 11700012 filed with NHTSA
Transmission and drivetrain Filed Sep 2025 OH

2010 Dodge Ram 1500 truck purchased used late May 2025 with 57000 miles. Late August 2025 with 60000 miles rear axle fell off when driving on Freeway at 60 miles per hour. Very serious accident was narrowly avoided as could not steer vehicle.Truck was serviced at dealership for recall of a pinion nut coming loose at 36107 miles in September 2013. Per this recall, the loose pinion nut can cause the axle to fail. The recall maintenance done in September 2013 at 36107 miles only lasted 24000 miles and serious safety issues reoccurred. In my opinion, on my vehicle the recall did not fix the problem.

Owner complaint 11687346 filed with NHTSA

Related recalls

17V821000 Filed Dec 20, 2017 1,482,874 vehicles

Column shift

Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.

Risk and remedy
Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Filed by
Chrysler (FCA US LLC) (manufacturer number T79)
13V038000 Filed Feb 6, 2013 278,674 vehicles

Differential unit

Chrysler is recalling certain model year 2009-2012 Ram 1500 trucks manufactured from February 27, 2008, through June 30, 2009, and from December 1, 2009, through October 20, 2011; model year 2009-2011 Dodge Dakota trucks manufactured from February 27, 2007, through June 30, 2009, and from December 1, 2009, through September 30, 2011; model year 2009 Chrysler Aspen trucks manufactured from January 3, 2008, through December 18, 2008; and model year 2009 Dodge Durango trucks manufactured from January 3, 2008, through December 18, 2008. The rear axle pinion nut may loosen due to an undersized pinion spline that can allow relative motion between the nut and companion flange.

Risk and remedy
Risk
If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.
Remedy
On November 7, 2013 Chrysler notified owners that dealers would install a pinion nut retainer, free of charge. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N08.
Filed by
Chrysler Group LLC (manufacturer number N08)
12V474000 Filed Oct 2, 2012 44,300 vehicles

Differential unit

Chrysler is recalling certain model year 2009-2010, Ram 1500 and Dodge Dakota trucks, manufactured from July 1, 2009, through November 30, 2009, because the rear axle pinion nut may loosen due to a lack of adhesive.

Risk and remedy
Risk
If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.
Remedy
Chrysler will notify owners, and dealers will install a pinion nut retainer, free of charge. The recall began on June 17, 2013. Owners may contact Chrysler at 1-800-247-9753.
Filed by
CHRYSLER GROUP LLC (manufacturer number M34)

Transmission and drivetrain complaints across Ram 1500 years

Questions about transmission and drivetrain problems

How common are transmission and drivetrain problems on the 2010 Dodge Ram 1500?

229 owners have reported transmission and drivetrain problems to NHTSA, 47% of all complaints for this model year.

Is there a recall for transmission and drivetrain problems on the 2010 Dodge Ram 1500?

Yes. 3 recalls for this model year concern the transmission: 17V821000, 13V038000, 12V474000.