Owners of the 2000 Dodge Ram have reported 21 suspension problems to NHTSA, 14% of all complaints about this model year.
Where owners named a specific part, the most common were front (12) and rear (2).
The typical report came at around 63,000 miles, and complaints were filed between March 2000 and December 2020.
These suspension complaints include 2 crashes and 2 injuries.
For comparison, the 1995 Ram has the most suspension complaints of any year, with 59.
Springs, struts, shocks, control arms, ball joints, bushings and stabilizer links, front and rear.
1 recall for this model year involves the suspension.
If your problem matches, a dealer repairs it free under the recall.
Complaints21
Typical mileage63k
Crashes / fires2 / 0
Injuries2
Parts named in these complaints
Front12
Rear2
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
SuspensionFiled Dec 2020108,000 milesNJ
When driving down highway felt intermittently loss of steering, brakes felt weak, noise when turni g. Repair shop said bearings gave and needed brakes. Then lost alignment, steering,would not respond properly...mechanic said due to rust, bearing failed again, frame is rotted by steering box and helping to spread under pressure..lucky to be alive , he said...no repair parts available and Dodge, aware of the problem, said sorry...no recalls have been issued...many complaints of this frame for due to a/ c drainage and radiator overflow..now unrepairable paper weight....mechanic said previous welding / repair was attempted which says knowledge…
Owner complaint 11383474 filed with NHTSA
SuspensionFiled Dec 200568,735 milesCOCrash
My wife was driving our 2000 Dodge dakota quad cab in a parking lot when the lower driver side ball joint failed causing a crash into a concrete pole AT the driver side door. There were no unusual noises before the failure and the upper ball joints had been replaced this year as part of the recall on all dakotas. This caused my wife to hit her head on the driver side window on impact.
Vehicle description: light duty pickup trucks. The welds AT the right side lower control arm bracket to axle tube attachment may have inadequate fatigue life due to poor weld quality. This CAN lead to separation of the control arm bracket from the axle tube.
Risk and remedy
Risk
If the bracket separates the vehicle could experience reduced directional stability, braking degradation and/or vehicle pull under braking.
Remedy
Dealers will replace the front axle with a properly welded front axle.
Filed by
DAIMLERCHRYSLER CORPORATION (manufacturer number 861)