Owners of the 1995 Dodge Stratus have reported 24 suspension problems to NHTSA, 8% of all complaints about this model year.
Where owners named a specific part, the most common were front (22) and rear (3).
The typical report came at around 31,000 miles, and complaints were filed between November 1995 and August 2005.
These suspension complaints include 1 fire.
For comparison, the 2001 Stratus has the most suspension complaints of any year, with 42.
Springs, struts, shocks, control arms, ball joints, bushings and stabilizer links, front and rear.
1 recall for this model year involves the suspension.
If your problem matches, a dealer repairs it free under the recall.
Complaints24
Typical mileage31k
Crashes / fires0 / 1
Injuries0
Parts named in these complaints
Front22
Rear3
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
SuspensionFiled Aug 2005TN
Dt: while the consumer was driving heard a knocking noise. She took vehicle to a mechanic, they told her that the lower ball joint was broken. No repairs were done made as of yet. The vehicle is not safe to drive.
Owner complaint 10133914 filed with NHTSA
SuspensionFiled Aug 200531,000 milesNC
Numerous failures-since I bought this "95 Dodge Stratus with only 30,000 miles. 1) engine making a knocking noise-I took car to the Dodge dealership-buchanan & young in burnsville, nc and had a new head gasket put on. 2) I replaced the battery because the car wouldn't start. I also replaced the battery cables, so the car would start, but this did not solve the problem. I replaced the starter to try to get the car to start. I still often have to get out and peck on the starter with a screwdriver to get it to start---even after I had a new starter put on.
Vehicle description: passenger vehicles. The lower control arm ball joint CAN separate due to loss of lubrication.
Risk and remedy
Risk
Separation of the ball joint could cause a loss of steering control increasing the risk of a vehicle crash.
Remedy
Dealers will inspect the ball joint end housing cover seal for leakage with a high pressure air tester and the rubber boot will be visually inspected for damage. If the cover seal leaks or the boot is damaged, the lower control arm will be replaced.