Owners of the 2013 Fiat 500 have reported 80 transmission problems to NHTSA, 48% of all complaints about this model year.
Where owners named a specific part, the most common were manual transmission (1).
The typical report came at around 65,000 miles, and complaints were filed between May 2015 and October 2026.
These transmission complaints include 1 crash, 2 fires, and 1 injury.
For comparison, the 2012 500 has the most transmission complaints of any year, with 201.
Automatic and manual transmissions, CVTs, clutches, axles, driveshafts and transfer cases: harsh or delayed shifts, slipping, shuddering and rolling away in park.
3 recalls for this model year involve the transmission.
If your problem matches, a dealer repairs it free under the recall.
Complaints80
Typical mileage65k
Crashes / fires1 / 2
Injuries1
Parts named in these complaints
Manual Transmission1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Transmission and drivetrainFiled Oct 2026117,627 milesCA
The contact owns a 2013 Fiat 500. The contact stated that the vehicle failed to start. The vehicle was towed to the dealer, where it was determined that the shifter cable bushing had failed. The vehicle was repaired under NHTSA Campaign Number: 19V817000 (Power Train); however, the failure recurred 25 miles later. Upon inspection, the contact became aware that the shifter cable bushing under the hood had detached again. The dealer was notified of the failure and informed the contact that the vehicle was repaired with the part provided by the manufacturer.
Owner complaint 11773031 filed with NHTSA
Transmission and drivetrainFiled Sep 2026NC
Gear cable broke. Automatic engine could not allow gears to shift. Would like for my vehicle to be included under NHTSA TECALL 19V-817. FCA Campaign Vb4.Fiat 500c 2012-13. MOPAR Fiat case #98205553.
Owner complaint 11767713 filed with NHTSA
Transmission and drivetrainFiled Apr 2026NY
Systemic Hydraulic Defect & Safety Recall Circumvention I am reporting a critical safety defect in the clutch hydraulic system of my 2013 Fiat 500 Abarth, which directly mirrors the failures described in NHTSA Recalls 16V-302 and 20V-124. Diagnostic measurements confirm a 1.23mm hydraulic over-travel in the clutch release bearing/slave cylinder assembly. This over-travel causes the diaphragm spring to be over-extended, leading to the catastrophic failure of the pressure plate and subsequent inability to disengage the clutch. This poses an immediate safety risk of vehicle surge or inability to shift gears while in motion.
Chrysler (FCA US LLC) is recalling certain 2012-2013 Fiat 500 vehicles equipped with 6-speed automatic transmissions. The shifter cable bushing may fail allowing the cable to detach from the transmission.
Risk and remedy
Risk
If the shifter cable detaches from the transmission, the transmission may not shift into the gear selected by the driver. Additionally, despite selecting PARK with the shifter, the vehicle may roll away. These scenarios may increase the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will replace the shifter cable adjuster, free of charge. The recall began January 9, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is VB4.
Chrysler (FCA US LLC) is recalling certain model year 2012-2016 Fiat 500 vehicles manufactured June 21, 2010, through January 12, 2016, equipped with a manual transmission. The clutch diaphragm spring may fracture and fail, causing an inability to switch gears.
Risk and remedy
Risk
If the clutch diaphragm spring fails, the driver may not be able to shift gears or the vehicle may lose motive power, increasing the risk of a crash.
Remedy
The remedy for this recall will include the installation of a clutch pedal limiter and a clutch pedal switch. The recall began on November 10, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S34.
Chrysler (FCA US LLC) is recalling certain model year 2013-2015 Fiat 500 battery electric vehicles manufactured March 8, 2013, to March 7, 2015. The Electric Vehicle Control Unit (EVCU) of the affected vehicles may set a diagnostic trouble code (DTC) that may cause the transmission to unexpectedly shift to neutral.
Risk and remedy
Risk
If the vehicle unexpectedly shifts to neutral, the loss of drive could increase the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will reprogram the EVCU, free of charge. The recall began June 19, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R20.
Filed by
Chrysler (FCA US LLC) (manufacturer number R20)
Transmission and drivetrain complaints across 500 years