There are 3 safety recalls on file for the 1992 Ford Aerostar,
filed between November 1997 and April 1999.
Each one is repaired free by a franchised Ford dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 1992 Aerostar is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
1999 (2)
Vehicle description: all wheel drive passenger minivans. (this includes all 1992 AWD aerostars not previously included in safety recall 97v-204/97s83). These vehicles CAN develop powertrain bending resonance or transfer case output shaft bushing displacement. The powertrain bending resonance or the output shaft bushing displacement CAN result in structural failure of the transmission and/or transfer case. Fluid explusion, driveshaft separation or loss of vehicle drive CAN result.
Risk and remedy
- Risk
- This condition CAN cause a loss of vehicle control, and, if the expelled fluid contacts the exhaust system, a vehicle fire could occur.
- Remedy
- Dealers will install a new transfer case rear output shaft bushing and an aluminum driveshaft will be installed.
- Filed by
- FORD MOTOR COMPANY
Vehicle description: mini vans. These vehicles were produced with a higher than specified electrical load through the accessory power feed circuit. The potential for contact between the b2 (battery), a2 (accessory), and p1 (proof) circuits CAN occur, creating a short circuit, allowing current to flow through the ground wire.
Risk and remedy
- Risk
- This CAN cause over heating and the potential for a vehicle fire.
- Remedy
- Dealers will install a jumper harness with a relay which will re-route and activate all a2 accessories through the relay.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 99S02)
1997 (1)
Vehicle description: all wheel drive passenger minivans. These vehicles CAN develop powertrain bending resonance or transfer case output shaft bushing displacement. The powertrain bending resonance or the output shaft bushing displacement CAN result in structural failure of the transmission and/or transfer case. Fluid explusion, driveshaft separation or loss of vehicle drive CAN result.
Risk and remedy
- Risk
- This condition CAN cause a loss of vehicle control, and, if the expelled fluid contacts the exhaust system, a vehicle fire could occur.
- Remedy
- Dealers will install a new transfer case rear output shaft bushing and an aluminum driveshaft will be installed.
- Filed by
- FORD MOTOR COMPANY
Recall questions
How many recalls does the 1992 Ford Aerostar have?
NHTSA lists 3 recalls for the 1992 Ford Aerostar.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.