There are 5 safety recalls on file for the 1993 Ford B600,
filed between November 1992 and August 1997.
Each one is repaired free by a franchised Ford dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 1993 B600 is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
1997 (1)
Vehicle description: heavy duty trucks, bus chassis-cowl, and basic chassis models equipped with cummins 5.9l 160 horsepower rotary injection pump diesel engines. The accelerator return springs CAN fracture.
Risk and remedy
- Risk
- The accelerator may not return to idle increasing the risk of a vehicle crash.
- Remedy
- Dealers will replace these springs with a torsion spring design.
- Filed by
- FORD MOTOR COMPANY
1995 (1)
Friction between the accelerat0r lever and the automatic transmission modulator lever CAN result in interference between the two levers which could prevent the engine from fully returning to idle.
Risk and remedy
- Risk
- This interference CAN prevent the engine from fully returning to idle and could result in loss of vehicle control and an accident.
- Remedy
- Dealers will install a revised modulator lever on the involved vehicles.
- Filed by
- FORD MOTOR COMPANY
1994 (2)
The steering gears have an improperly machined snap ring groove. This CAN cause a fracture of the snap ring with subsequent damage to the recirculating ball guide tube. Also, the o-ring seal in vehicles built after february 1988 does not meet specifications and is inadequate, causing interior leakage around the o-ring / glide ring seal in the steering gear.
Risk and remedy
- Risk
- The fracture of the snap ring results in increasing deterioration of the ability to turn the vehicle to the right. The driver would experience increased steering efforts or a "crunchy" feeling AT the steering wheel. The inadequate o-ring seal causes momentary reductions in power steering assist AT low speed and certain left turn maneuvers. Both conditions result in decreased steering ability.
- Remedy
- Dealers will rebuild the steering gear. If a broken snap ring is found during rebuilding, the steering gear will be replaced with a remanufactured unit.
- Filed by
- FORD MOTOR COMPANY
System: electrical system; battery. Vehicle description: medium duty school bus chassis equipped with hydraulic brakes, tilt hoods, 5.9l, 6.6l or 7.6l diesel engines or 6.1l or 7.0l gasoline engines and originally sold or currently registered in connecticut, illinois, indiana, maine, massachusetts, michigan, new hampshire, new jersey, new york, ohio, pennsylvania ,rhode island, vermont, and wisconsin. The battery power junction block mounted on the right fender apron, which serves as an electrical connection point for several engine compartment systems, is susceptible to road splash. The terminals AT the junction block CAN experience corrosion and CAN fracture, causing loss of electrical power and engine shutdown.
Risk and remedy
- Risk
- Engine shutdown, loss of power steering assist, or loss of hydraulic brake boost CAN occur which may result in loss of vehicle control and an accident.
- Remedy
- Dealers will replace the junction box, main power terminal the starter or starter relay and terminals AT the existing junction block. The wiring of the hydraulic brake circuit will also be modified by bypassing the junction block. The new terminals will be made from an alloy material more resistant to salt corrosion.
- Filed by
- FORD MOTOR COMPANY
1992 (1)
Risk and remedy
- Risk
- Using the wrong sized clamps to attach the rim and tireassembly to the wheel spokes could cause the studs that attach the clamps to thespokes to bend. If the studs are bent, there is an increased risk of studfracture that could result in the rim and tire assembly breaking from thewheel.
- Remedy
- Replace the clamps and studs on the cast spoke wheels.
- Filed by
- FORD MOTOR COMPANY
Recall questions
How many recalls does the 1993 Ford B600 have?
NHTSA lists 5 recalls for the 1993 Ford B600.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.