Owners of the 2023 Ford Bronco have reported 14 driver-assistance problems to NHTSA, 6% of all complaints about this model year.
Where owners named a specific part, the most common were rearview system braking (4), warnings (3), and automatic emergency braking (1).
The typical report came at around 48,000 miles, and complaints were filed between February 2023 and September 2026.
These driver-assistance complaints include 2 crashes.
For comparison, the 2022 Bronco has the most driver-assistance complaints of any year, with 35.
Automatic emergency braking, forward collision warning, lane keeping, blind spot and adaptive cruise systems, including phantom braking.
3 recalls for this model year involve the driver-assistance.
If your problem matches, a dealer repairs it free under the recall.
Complaints14
Typical mileage48k
Crashes / fires2 / 0
Injuries0
Parts named in these complaints
Rearview System Braking4
Warnings3
Automatic Emergency Braking1
Sensing System1
Adaptive Cruise Control1
Blind Spot Detection1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Driver assistanceFiled Sep 202632,752 milesAZ
The contact owns a 2023 Ford Bronco. The contact stated that the vehicle experienced an issue with the rearview camera while in use. The contact received a notice for NHTSA Campaign Number: 26V124000 (Back Over Prevention), and the recall repair was subsequently performed. However, after the recall repair was completed, a new 'overheating' warning appeared on the infotainment system. The vehicle was returned to the dealer, where technicians tested the system and confirmed that during a single operation, the system's temperature spiked from 93°F to 150°F.
Owner complaint 11766792 filed with NHTSA
Driver assistanceFiled Jun 2026MS
Camera and sensor on driver side does not indicate movement/stops working. This results in the Blindspot detection not working or any cross traffic alerts or object detection, which can lead to an accident. occurs intermittently and car does not issue a warning that the system is not working or down. Also causing an issue when backing up
Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Risk and remedy
Risk
A rearview camera that fails to display an image can reduce the driverâs view behind the vehicle, increasing the risk of a crash.
Remedy
The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Ford Motor Company (Ford) is recalling certain 2022-2023 Bronco vehicles. The 360-degree view camera may not display a rearview image when the vehicle is placed in reverse.
Risk and remedy
Risk
Loss of the rearview camera image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy
Dealers will replace the rearview camera, free of charge. Owner notification letters were mailed October 8, 2025. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 23S48. This recall expands previous recall number 23V-598.
Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Risk and remedy
Risk
A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy
The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.