There are 6 safety recalls on file for the 2001 Ford Explorer,
filed between October 2000 and October 2009.
Each one is repaired free by a franchised Ford dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 2001 Explorer is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
2009 (1)
09V399000
Filed Oct 13, 2009 4,500,000 vehicles
Ford is recalling model years 1995-2003 windstar, 2000-2003 excursion diesel, 1993-1997 and 1999-2003 F-250 sd through f-550 sd diesel, 1992-2003 e-150 through e-550, 1995-2002 explorer, 1997 and 2002 mercury mountaineer, 1995-1997 and 2001-2003 ranger, and 1994 f53 vehicles equipped with the texas instruments speed control deactivation switch (scds). The scds may leak internally and then overheat, smoke, or burn.
Risk and remedy
- Risk
- A vehicle fire could occur with or without the engine running.
- Remedy
- Ford will notify owners that dealers will install a fused wiring harness in line with the scds. On 1999-2003 windstar vehicles with a leaking scds, dealers will also inspect the ABS control module connector and repair as necessary. Repairs will be completed free of charge. The safety recall began on october 27, 2009. Owners may contact ford AT 1-888-222-2751.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 09S09)
2007 (1)
07V336000
Filed Aug 3, 2007 3,600,000 vehicles
On certain pickup trucks, passenger vehicles, sport utility vehicles, and motor homes chassis, the speed control deactivation switch may, under certain conditions, leak internally and then overheat, smoke, or burn.
Risk and remedy
- Risk
- This could result in an underhood fire.
- Remedy
- Dealers will install a fused wiring harness. Owners of the passenger cars included in this campaign will be instructed to return their vehicles to their dealers to have the speed control deactivation switch disconnected as an interim repair. As soon as repair parts are available (expected october 2007), owners will be instructed to return to the dealers for installation of a fused wiring harness. The recall began on august 13, 2007, and mailing completed by september 19, 2007. Owners may contact ford AT 1-888-222-2751.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 05S28)
2003 (3)
03V281000
Filed Aug 5, 2003 1,552,880 vehicles
On certain sport utility vehicles equipped with high back seats, the upper bolt on the driver's side high back seat, that attaches the seat recliner mechanism to the seat back frame, could fracture. If the bolt fractures and does not jam in the seat back frame, the seat back may recline until it makes contact with an object behind the seat, such as the second row seat cushion.
Risk and remedy
- Risk
- The driver could potentially lose contact with the steering wheel or foot pedals during such an event, increasing the risk of a crash.
- Remedy
- Dealers will replace the driver seat upper bolt with a metal spacer and bolt. In addition, seats with tubular back frames will have the fully threaded lower recliner bolt replaced with a partially threaded bolt. Owner notification began on august 29, 2003. Owners should contact ford AT 1-800-392-3673.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 03S04)
On certain sport utility vehicles equipped with speed control and 4.0l sohc engines, if the strand cover on the speed control cable becomes flared AT the end, the speed control cable may bind when the speed control is activated.
Risk and remedy
- Risk
- The throttle return spring force may not be sufficient to overcome the binding condition when the speed control is disengaged. Braking function would be maintained though stopping distances may be increased.
- Remedy
- Dealers will inspect the speed control cable and, if necessary, replace it. Owner notification began august 29, 2003. Owners should contact ford AT 1-800-392-3673.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 03S03)
Certain pickup truck, van, and mini van conversions equipped with southern comfort built running boards that contain certain courtesy lights manufactured by american technology components, inc. These units contain a courtesy light or lights that might overheat when the wire harness is exposed to excessive moisture and road salt.
Risk and remedy
- Risk
- This overheating condition CAN cause the running board to melt or cause a fire.
- Remedy
- Dealers will replace the wiring harness on these running boards. Owner notification began march 7, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact southern comfort AT 1-800-745-6096.
- Filed by
- SOUTHERN COMFORT CONVERSIONS
2000 (1)
Vehicle description: certain sport utility vehicles fail to comply with the requirements of part 567.4, "certification." these vehicles were shipped from the assembly plant without safety certification labels.
Risk and remedy
- Risk
- Incorrect tire inflation pressure could result in tire tread separation, increasing the risk of a crash.
- Remedy
- Dealers will replace the certification labels.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00L10)
Recall questions
How many recalls does the 2001 Ford Explorer have?
NHTSA lists 6 recalls for the 2001 Ford Explorer.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.