There are 7 safety recalls on file for the 2008 Ford F-250,
filed between March 2007 and January 2009.
Each one is repaired free by a franchised Ford dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 2008 F-250 is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
2009 (2)
Comm trans is recalling 108 my 2005-2008 ford e250 and e350 vans built on ford chassis and equipped with ricon platform style wheelchair lifts. These lifts fail to comply with the requirements of federal motor vehicle safety standard no. 403, "platform lift system accessible for motor vehicles." the anti-stow interlock may not detect the presence of a wheelchair or mobility aid user. The pressure sensing switch that detects the presence of weight on the platform was not adjusted to the necessary sensitivity level. The lift could stow even though someone or something is still on the lift.
Risk and remedy
- Risk
- A lift occupant CAN be injured should the lift begin to stow unintentionally.
- Remedy
- Comm trans is working with ricon to correct the wheelchair lifts free of charge (please see 07e097). Owners may contact ricon AT 1-818-267-3000 or comm trans AT 901-726-9394.
- Filed by
- COMM TRANS SULLY CORPORATION
Comm trans is recalling 111 my 2005-2008 ford e250 and e350 vans built on ford chassis and equipped with ricon platform style wheelchair lifts. These vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 404, "platform lift installations on motor vehicles." the threshold warning system may not detect the presence of a wheelchair or mobility aid user in a certain spot within the defined threshold area.
Risk and remedy
- Risk
- The user of the lift could be injured should the lift move unintentionally.
- Remedy
- Comm trans is working with ricon to correct the wheelchair lifts free of charge (please see 07e095). Owners may contact ricon AT 1-818-267-3000 or comm trans AT 901-726-9394.
- Filed by
- COMM TRANS SULLY CORPORATION
2008 (2)
Ford is recalling 64,754 my 2008 F-250 and F-350 single rear wheel, 4X4, 156 inch wheel base pick up trucks equipped with a two piece drive shaft for failing to conform to the fuel spillage requirements of federal motor vehicle safety standard no. 301, "fuel system integrity." during a 30 MPH frontal impact into a rigid barrier, the fuel tank CAN move forward and contact a frame cross member, potentially causing damage to the fuel delivery module which CAN result in fuel spillage.
Risk and remedy
- Risk
- Fuel spillage, in the presence of an ignition source, could result in a fire.
- Remedy
- Dealers will install a bracket on the affected vehicles free of charge. The recall began on may 23, 2008. Owners may contact ford AT 1-800-392-3673.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 08C04)
Ford is recalling 87,515 my 2008 f250, F-350, f-450, and f-550 vehicles for failing to comply with all the requirements of federal motor vehicle safety standard no. 207, "seating systems." some 40% split and captain's chair driver's seats, equipped with lumbar supports, may have improper welds AT the joint of the seat back pivot bracket and the seat back frame.
Risk and remedy
- Risk
- In the event of a crash, the seat side pivot bracket may crack or break, increasing the risk of injury to the seat occupant.
- Remedy
- Dealers will add a reinforcement to the driver's seat back frame on the 40% split or captain's chair seat equipped with lumbar support or, if necessary, the seat back frame will be replaced. The recall began on march 28, 2008. Owners may contact ford AT 1-800-392-3673.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 08C01)
2007 (3)
Certain vehicles fail to conform to the requirements specified in federal motor vehicle safety standard no. 208, 'occupant crash protection.' the driver air bag module may not have been properly assembled.
Risk and remedy
- Risk
- This condition may prevent the driver air bag from properly deploying and reduce occupant protection in the event of a crash.
- Remedy
- Dealers will replace your driver air bag module free of charge. The recall began on november 20, 2007. Owners may contact ford AT 1-800-392-3673.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 07C19)
On certain trucks equipped with a 6.4l diesel engine, insufficient clearance of the battery positive (b+) wire to the right hand splash shield bolt may result in the battery b+ wire contacting the splash shield bolt.
Risk and remedy
- Risk
- Long term contact could cause wire chafe, resulting in copper wire being exposed. If this condition occurs, the battery b+ wire could short to ground increasing the risk of a fire.
- Remedy
- Dealers will inspect the battery b+ wire location and, if necessary, reposition the wire. The recall began on april 3, 2007. Owners may contact ford AT 1-800-392-3673.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 07S50)
On certain trucks equipped with a 6.4l diesel engine, excessive temperatures in the diesel particulate filter in the exhaust system may result from excess hydrocarbons in the exhaust.
Risk and remedy
- Risk
- Lack of power or rough operation, unusual noises from the engine or exhaust, white smoke from the exhaust, and potentially a visible flame out the tailpipe CAN occur.
- Remedy
- Dealers will reprogram the power train control module. The recall began on april 3, 2007. Owners may contact ford AT 1-800-392-3673.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 07S49)
Recall questions
How many recalls does the 2008 Ford F-250 have?
NHTSA lists 7 recalls for the 2008 Ford F-250.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.