Owners of the 2013 Ford Focus have reported 263 fuel system problems to NHTSA, 12% of all complaints about this model year.
Where owners named a specific part, the most common were storage (4) and fuel injection system (1).
The typical report came at around 80,000 miles, and complaints were filed between April 2013 and September 2026.
These fuel system complaints include 4 crashes, 3 fires, 1 injury, and 1 death.
For comparison, the 2000 Focus has the most fuel system complaints of any year, with 411.
Fuel pumps, injectors, lines, tanks, filler necks and evaporative systems, gasoline and diesel, including leaks and fuel smell.
3 recalls for this model year involve the fuel system.
If your problem matches, a dealer repairs it free under the recall.
Complaints263
Typical mileage80k
Crashes / fires4 / 3
Injuries1
Parts named in these complaints
Storage4
Fuel Injection System1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Fuel systemFiled Sep 2026IL
The vehicle suffered a major mechanical and electrical failure on July 28, 2026, and was immediately towed to an authorized dealership. After a multi-day delay awaiting a senior technician's analysis, the dealership issued a single service ticket grouping two distinct issues: a failed Canister Purge Valve (active Safety Recall 26S40) and localized wiring damage. The dealership fraudulently drafted the ticket to imply that external rodent damage caused the recall component failure.
Owner complaint 11766562 filed with NHTSA
Fuel systemFiled Jul 2026GA
The evap canister purge valve has been a recurring problem for this vehicle. The canister was replaced in 2021, but continued having problems, as it pulled a vacuum on the fuel tank in upwards of 3/8 inch. (Documented by Murray Ford in 2023 and reassuredthere was no issue by them) the vehicle has displayed inaccurate fuel readings and caused our family to be disabled and then stranded in the night on highway 95. It put the safety of my family, and other motorists at risk The problem hasn't been duplicated because their "software fix" essentially ignored the problem altogether. There were no warnings.
Owner complaint 11750254 filed with NHTSA
Fuel systemFiled Jul 2026GA
I am reporting a severe vehicle safety hazard and engine stalling incident on my 2013 Ford Focus caused by an un-remedied factory emissions safety defect (related to Ford Recall 26S40 / 18S32). Due to an incomplete factory software monitoring patch, the canister purge valve stuck open and allowed continuous, unchecked engine vacuum to pull straight out of the plastic fuel tank. This heavy vacuum physically collapsed and deformed the bottom of the plastic fuel tank inward by approximately 0.25 to 0.375 inches.
Ford Motor Company (Ford) is recalling certain 2012-2018 Focus vehicles previously repaired incorrectly under recall number 18V735. The Canister Purge Valve (CPV) may malfunction, causing the engine to stall unexpectedly while driving.
Risk and remedy
Risk
An engine that stalls while driving increases the risk of a crash.
Remedy
Dealers will update the powertrain control module (PCM) software, free of charge. Owner notification letters were mailed July 29, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S40. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on July 6,2026.
Ford Motor Company (Ford) is recalling certain 2012 and 2017 Focus vehicles equipped with 2.0L GDI gasoline engines and 2013-2014 Focus ST vehicles equipped with 2.0L GTDI engines, previously recalled under 18V-735. The affected vehicles did not have the Powertrain Control Module (PCM) updated as intended. Therefore, the Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in the fuel vapor management system.
Risk and remedy
Risk
The excessive vacuum may result in an engine stall while driving, without warning and without the ability to restart the vehicle, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will reprogram the Powertrain Control Module. Dealers will also check for fault codes and replace the CPV as needed. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. The recall began July 29, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S22.
Ford Motor Company (Ford) is recalling certain 2012-2018 Ford Focus vehicles with a 2.0L GDI or 2.0L GTDI engine. The Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in fuel vapor management system.
Risk and remedy
Risk
The excessive vaccuum may result in an engine stall while driving, without warning and without the ability to restart the vehicle, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will reprogram the Powertrain Control Module. Dealers will also check for fault codes and replace the CPV as needed. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. The recall began August 19, 2019. Owners may contact Ford Customer service at 1-866-436-7332. Ford's number for this recall is 18S32. Note: Until the vehicle is serviced for this concern, owners are advised to keep the fuel tank at least halfway full.