Owners of the 1995 Ford Taurus have reported 86 brakes problems to NHTSA, 7% of all complaints about this model year.
Where owners named a specific part, the most common were foundation components (54), antilock/traction control/electronic limited slip (37), and power assist (3).
The typical report came at around 104,000 miles, and complaints were filed between January 1995 and July 2014.
These brakes complaints include 10 crashes and 7 injuries.
For comparison, the 1993 Taurus has the most brakes complaints of any year, with 110.
Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.
1 recall for this model year involves the brakes.
If your problem matches, a dealer repairs it free under the recall.
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
BrakesFiled Jul 201492,241 milesOH
Brake lines AT the front driver side wall from the ABS pump rusted through during vehicle operation causing loss of fluid and ability to safely stop the vehicle.
Owner complaint 10616633 filed with NHTSA
BrakesFiled Mar 200741,658 milesNY
Tl* - the contact called regarding the 1995 Ford Taurus. The contact stated that the front steering was pulling to the right. The steering wheel also vibrated. The vehicle was diagnosed as needing a realignment. The contact stated that the vehicle did not need an alignment before he took the vehicle to dealer for maintenance. The contact stated that the brakes and the bushings were replaced. The current and failure mileage were both 41,658 miles.
Owner complaint 10184531 filed with NHTSA
BrakesFiled Mar 2006118,000 milesVA
Dt*: the contact stated while driving 5 MPH, the brake pedal was depressed and there was no brake pressure. This occurred with no warning. The transmission was put into low gear and the engine was turned off. The vehicle was towed to the dealership, where it was determined the proportioning valve failed causing a rupture in the brake line and loss of brake fluid. The valve and brake line are being replaced.
The retainer clip which holds the master cylinder push rod to the brake pedal arm is missing or not completely installed. The push rod CAN separate from the brake pedal arm.
Risk and remedy
Risk
This CAN result in loss of braking ability and an accident.
Remedy
Dealers will inspect and, if necessary, install the retainer clip.