Owners of the 1998 GMC Yukon have reported 11 steering problems to NHTSA, 14% of all complaints about this model year.
Where owners named a specific part, the most common were gear box (other than rack and pinion) (3), steering wheel/handle bar (1), and gear box (1).
The typical report came at around 103,000 miles, and complaints were filed between March 2001 and August 2013.
For comparison, the 1997 Yukon has the most steering complaints of any year, with 53.
Power steering pumps and electric assist, racks, columns, tie rods and sudden loss of steering assist.
1 recall for this model year involves the steering.
If your problem matches, a dealer repairs it free under the recall.
Complaints11
Typical mileage103k
Crashes / fires0 / 0
Injuries0
Parts named in these complaints
Gear Box (Other Than Rack And Pinion)3
Steering Wheel/Handle Bar1
Gear Box1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
SteeringFiled Aug 2013160,000 milesOR
Power steering pump lost "power", luckily, AT low speed and close to home. The pulley shaft broke off AT the impeller. I replaced the pump, with a reman from autozone. The "new" pump lasted about 25 miles before it's shaft broke. I'm installing a replacement reman this evening.
Owner complaint 10535403 filed with NHTSA
SteeringFiled Mar 2010120,000 milesCA
The power steering goes into "full mode" AT speeds above about 25 MPH, making a one inch movement of the steering wheel into the equivalent of a one quarter turn of the wheel. It is especially dangerous on the freeway, although on city streets it makes the vehicle jerk around in the lane. This has already been reported and has resulted in one death and about 8-10 accidents. My wife and children will not drive the vehicle due to this condition, and I have had several "close calls" due to this faulty GMC part, which has a technical service bulletin already published about it.
Vehicle description: light duty extended-cab pickup trucks and 4-door utility trucks. The lower steering shaft to steering gear pinch bolt is "finger loose" or missing allowing the bolt to loosen and fall out. The steering shaft yoke CAN wear causing an off center steering wheel.
Risk and remedy
Risk
Relative movement between the chassis and cab CAN cause the steering shaft to separate from the steering gear. This condition CAN result in a loss of steering control increasing the risk of a vehicle crash.
Remedy
Dealers are arranging to have the vehicles involved towed to the dealership and alternate transportation is being arranged for owners. Dealers will then inspect the vehicle for the presence of a pinch bolt and torque this bolt to proper specifications.