Owners of the 1991 Honda Prelude have reported 9 seat belt problems to NHTSA, 60% of all complaints about this model year.
Where owners named a specific part, the most common were front (8).
The typical report came at around 193,000 miles, and complaints were filed between May 1995 and August 2003.
These seat belt complaints include 2 crashes, 4 injuries, and 1 death.
No other Prelude year has as many seat belt complaints.
Belts, buckles, retractors, pretensioners and anchorages.
1 recall for this model year involves the seat belt.
If your problem matches, a dealer repairs it free under the recall.
Complaints9
Typical mileage193k
Crashes / fires2 / 0
Injuries4
Parts named in these complaints
Front8
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Seat beltsFiled Jan 1999NY
While driving the front driver side seat belt buckle won't lock and will come apart whenever the consumer moves which mak's the buckle to operate improperly.
Owner complaint 833333 filed with NHTSA
Seat beltsFiled Oct 1998CACrash
This head-on collision was investigated by the chp. Central division chp m.a.I.t. Was requested to examine the failure of the driver's side restraint. Upon examination sgt. Esmay determined that the restraint was being worn due to the signs of loading on the webbing and loop guide. The webbing of the belt separated near the loop guide. The driver of this vehicle, douglas guy vetch, dob 10/06/68, was seriously injured. The fatal victim was in the other vehicle. The speed quoted(50mph)is a rough estimate based on the observed damage and apparent collision dynamics. This collision is being reported per chp policy. It is being reported by sgt.
The front safety belt buckle release buttons CAN break. These red plastic release buttons are marked "press." if a button breaks, pieces CAN fall into the buckle assembly causing the buckle to operate improperly.
Risk and remedy
Risk
The safety belts would not provide adequate protection to an occupant in a vehicle crash.
Remedy
Owners should promptly check the condition and operation of both front safety belt buckles. Carefully inspect the red release button for any breaks or cracks. Check that both buckles are operating properly by inserting each latch plate into its buckle, tug on the belt to make sure the latch is securely locked, then press the release button. The latch plate should pop out of the buckle when the button is pressed. If either release button shows any sign of breakage or cracking, or if either buckle fails to operate properly, promptly contact your authorized honda/acura dealer to schedule an appointment to have the buckle replaced or repaired, free of charge. The manufacturer is developing a remedy designed to prevent the failure of the buttons that are not currently broken.