Owners of the 2020 Jeep Gladiator have reported 55 transmission problems to NHTSA, 11% of all complaints about this model year.
Where owners named a specific part, the most common were axle assembly (1) and driveline (1).
The typical report came at around 13,000 miles, and complaints were filed between September 2019 and October 2026.
These transmission complaints include 2 crashes, 4 fires, and 2 injuries.
For comparison, the 2021 Gladiator has the most transmission complaints of any year, with 71.
Automatic and manual transmissions, CVTs, clutches, axles, driveshafts and transfer cases: harsh or delayed shifts, slipping, shuddering and rolling away in park.
4 recalls for this model year involve the transmission.
If your problem matches, a dealer repairs it free under the recall.
Complaints55
Typical mileage13k
Crashes / fires2 / 4
Injuries2
Parts named in these complaints
Axle Assembly1
Driveline1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Transmission and drivetrainFiled Oct 2026TN
My 2020 Jeep Gladiator has been experiencing transmission slipping, jerking at 20â30 mph, and rough shifting into Reverse, with diagnostic code P0733. An authorized Jeep dealership inspected the vehicle and confirmed that the transmission problem matches Jeepâs Technical Service Bulletin regarding D-clutch failure. Despite confirming the defect and the need for repair, the dealership returned my vehicle without fixing it. I am concerned about the potential safety risks and request that NHTSA investigate this known issue and consider whether a safety recall is warranted.
Owner complaint 11770698 filed with NHTSA
Transmission and drivetrainFiled Sep 2026SC
Clutch overheated and cause an immense amount of smoke during drive with no warning indication from hud. Dealer stated that clutch has gotten well passed 390°c Heat from clutch has also caused front driver caliper to lock up and damage rotors.
Owner complaint 11762397 filed with NHTSA
Transmission and drivetrainFiled Jun 2026TX
The start-stop system reports unavailable, then within a few miles of driving, the check engine light will come on, followed by problems with the transmission shifting gears, sometime causing the vehicle to stay in first or second gear while accelerating and creating a dangerous driving situation. Power cycling the vehicle sometimes helps. Diagnostic trouble codes show low voltage in one or more O2 sensors, "too lean" warnings and cylinders randomly misfiring. Engine runs very rough at idle with the strong smell of gas in the exhaust. Dash information shows battery voltage around 12.3 at start up increasing to low 13 while idling.
Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Risk and remedy
Risk
Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy
Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.
Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Risk and remedy
Risk
Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy
FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.
Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Risk and remedy
Risk
The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.
Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator vehicles. The rear driveshafts may have been incorrectly assembled without grease in the monoblock joint.
Risk and remedy
Risk
A joint without grease may overheat and seize, possibly causing the driveshaft to fracture, resulting in a sudden loss of drive power. If the driveshaft completely separates from the vehicle it may become a road hazard. Either of these scenarios can increase the risk of a crash.
Remedy
FCA US will notify owners, and dealers will replace the driveshaft, free of charge. The recall began October 10, 2019. Owners may contact FCA US customer service at 1-800-853-1403. FCA US number for this recall is V95.
Filed by
Chrysler (FCA US LLC) (manufacturer number V95)
Transmission and drivetrain complaints across Gladiator years