Owners of the 2006 Jeep Liberty have reported 76 transmission problems to NHTSA, 6% of all complaints about this model year.
Where owners named a specific part, the most common were automatic transmission (22), driveline (2), and manual transmission (2).
The typical report came at around 53,000 miles, and complaints were filed between February 2006 and January 2026.
These transmission complaints include 4 crashes and 2 fires.
For comparison, the 2005 Liberty has the most transmission complaints of any year, with 97.
Automatic and manual transmissions, CVTs, clutches, axles, driveshafts and transfer cases: harsh or delayed shifts, slipping, shuddering and rolling away in park.
2 recalls for this model year involve the transmission.
If your problem matches, a dealer repairs it free under the recall.
Complaints76
Typical mileage53k
Crashes / fires4 / 2
Injuries0
Parts named in these complaints
Automatic Transmission22
Driveline2
Manual Transmission2
Clutch Assembly1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Transmission and drivetrainFiled Jan 2026IA
Vehicle: 2006 Jeep Liberty VIN: [XXX] Summary: The front lower ball joint on my 2006 Jeep Liberty failed while the vehicle was in normal use. This failure matches the defect described in NHTSA Recall 06V288000 (Chrysler F23), which involves corrosion and separation of the front lower ball joints. My VIN does not currently show this recall as open, but the failure occurred exactly as described in the recall documentation. Details: In November 2025, the front end of the vehicle collapsed due to a lower ball joint separation. The joint failed without warning, causing loss of steering control. The vehicle had to be towed home by AAA.
Owner complaint 11713720 filed with NHTSA
Transmission and drivetrainFiled Dec 2021OH
Hello, my name is Jamie Woodley. I'm filing this complaint on my 2006 Jeep Liberty Sport. Currently, there's a recall for the Suspension Rear lower control arms. I've read the previous recalls on it, which I saw this vehicle has been reprogrammed before. I've only had the vehicle for a few months and I've had an oil leak, bad thermostat, and the transmission is busted. I can't reverse or drive over 10 mph. I heard the transmission may be in Fail Safe mode. I had Midas do a full inspection, but they failed to acknowledge the lower control arms by suggesting brakes. I knew it wasn't the brakes.
Owner complaint 11442526 filed with NHTSA
Transmission and drivetrainFiled May 2020213,000 milesGA
Tl* the contact owns a 2006 Jeep Liberty. The contact stated that while attempting to shift from park to drive, the gear shifter ceased in park. The contact removed the center console and simultaneously turned the ignition key while manually adjusting the shifter cable to shift from park into drive. The contact contacted fitzgerald chrysler dodge Jeep ram (187 benjamin h hill dr w, fitzgerald, ga 31750, (229) 423-5720) and informed the dealer of the failure. The vehicle was not diagnosed nor repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 213,000.
Chrysler (FCA US LLC) is recalling certain model year 2006 Dodge Viper and Jeep Wrangler and Liberty vehicles manufactured July 1, 2005, to July 31, 2006. In the affected vehicles, the springs within the clutch pedal position switch that prevents the vehicle from starting unless the clutch pedal is pushed down may break. As a result, the vehicle may not be started when the clutch pedal is pushed down or the engine may crank and start without the clutch pedal being pushed down causing the vehicle to unexpectedly lurch.
Risk and remedy
Risk
If the vehicle unexpectedly moves there is an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will replace the clutch ignition interlock switch, free of charge. The recall began on August 31, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R13.
On certain pickup trucks, sport utility and passenger vehicles equipped with 42rle automatic transmissions, the cup plug that retains the park pawl anchor shaft may be improperly installed. If the shaft moves out of position, the vehicle may not be able to achieve 'park' position.
Risk and remedy
Risk
If this occurs and the parking brake is not applied, the vehicle may roll away and cause a crash without warning.
Remedy
Dealers will inspect the transmissions and install a bracket to ensure the park pawl anchor shaft is retained in the proper position. The recall began on november 28, 2005. Owners may contact daimlerchrysler AT 1-800-853-1403.
Filed by
DAIMLERCHRYSLER CORPORATION (manufacturer number E14)
Transmission and drivetrain complaints across Liberty years