Owners of the 1993 Jeep Wrangler have reported 6 electrical problems to NHTSA, 6% of all complaints about this model year.
Where owners named a specific part, the most common were wiring (3), starter assembly (2), and alternator/generator/regulator (1).
Complaints were filed between February 1995 and August 1999.
These electrical complaints include 2 fires.
For comparison, the 2024 Wrangler has the most electrical complaints of any year, with 422.
Batteries, alternators, wiring, fuses, ignition, instrument clusters, infotainment and body electronics, including warning lights and parasitic drain.
1 recall for this model year involves the electrical.
If your problem matches, a dealer repairs it free under the recall.
Complaints6
Typical mileagen/a
Crashes / fires0 / 2
Injuries0
Parts named in these complaints
Wiring3
Starter Assembly2
Alternator/Generator/Regulator1
12V/24V/48V Battery1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Electrical systemFiled Oct 1997CAFire
Electrical: noticed gauge was reading zero then it came up. Noticed smoke and flames coming from the hood, vehicle still running. Put the fire out, removed terminal from battery to stop vehicle from running.checked cables/alternator, and there was nothing wrong.
Owner complaint 817666 filed with NHTSA
Electrical systemFiled Jan 1996MN
Dealer did repairs for recall 94v106000, dealer damaged wiring while making repairs. Tt consumer states dealer lowered the tank without disconnecting the fuel pump, the weight of the gas damaged the harness wires and fuel pump wires, vehicle broke down fivedays later, was towed to nearest dealerm they did a tempoary fix and said take it back to dealer to correct repair, consumer discovered they never repaired the first damaged they caused.
Salt corrosion products between the starter solenoid wire and the adjacent battery feed in the bulkhead connector may short these connections, causing the circuit to bypass the ignition key control of the starter motor solenoid. The car CAN start without the starter sequence being initiated by the ignition key in the ignition lock.
Risk and remedy
Risk
The unintended start of a vehicle with a manualtransmission left in a drive gear CAN result in a runaway vehicle.
Remedy
The starter solenoid wiring will be separated from the battery feed wire by relocating it within the bulkhead connector on affected vehicles.
Filed by
CHRYSLER CORPORATION
Electrical system complaints across Wrangler years