Owners of the 2018 Jeep Wrangler have reported 177 transmission problems to NHTSA, 10% of all complaints about this model year.
Where owners named a specific part, the most common were clutch assembly (6), automatic transmission (2), and driveline (1).
The typical report came at around 27,000 miles, and complaints were filed between May 2018 and September 2026.
These transmission complaints include 2 crashes, 13 fires, and 2 injuries.
For comparison, the 2012 Wrangler has the most transmission complaints of any year, with 282.
Automatic and manual transmissions, CVTs, clutches, axles, driveshafts and transfer cases: harsh or delayed shifts, slipping, shuddering and rolling away in park.
4 recalls for this model year involve the transmission.
If your problem matches, a dealer repairs it free under the recall.
Complaints177
Typical mileage27k
Crashes / fires2 / 13
Injuries2
Parts named in these complaints
Clutch Assembly6
Automatic Transmission2
Driveline1
Manual Transmission1
Transfer Case (4-Wheel Drive)1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Transmission and drivetrainFiled Sep 202654,000 milesNJ
The contact owns a 2018 Jeep Wrangler. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 23V116000 (Power Train); however, the failure persisted after the recall repair. While driving 15 MPH, the instrument cluster failed to display the gear that the transmission was shifted to. Several unknown warning lights were illuminated, and the vehicle failed to turn off. The contact stalled the engine and waited for the vehicle to shut off. The vehicle was taken to the dealer, who determined that the instrument cluster had damaged the transmission and CAN C bus connector.
Owner complaint 11767371 filed with NHTSA
Transmission and drivetrainFiled Sep 2026CA
FCA US LLC is actively violating the intent of Safety Campaign 23V-116 by refusing to cover out-of-pocket consequential transmission damages. FCAâs own Part 573 Defect Report explicitly admits that the defective clutch pressure plate causes extreme friction, overheating, and fracturing capable of damaging the transmission case and nearby internal components. The vehicle operated under these defective parameters prior to the recall execution, subjecting the transmission internals to progressive thermal fatigue and severe structural vibration.
Owner complaint 11766430 filed with NHTSA
Transmission and drivetrainFiled Sep 2026FL
report to the dealer that my 2018 jeep has recall for clotch overheating and vehicle can catch on fire , and it has been 3 years with no respond or completion or the job been done , feel kind of scared for the safety of me and my family every day driving ah vehicle can catch on fire . please help us to resolve this situation thanks
Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Risk and remedy
Risk
Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy
Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.
Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Risk and remedy
Risk
Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy
FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.
Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Risk and remedy
Risk
The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.
Chrysler (FCA US LLC) is recalling certain 2018 Dodge Charger, Durango and Challenger, Jeep Grand Cherokee and Wrangler, Chrysler 300, and RAM 1500 vehicles. An incorrect transmission park lock rod may have been installed in the transmission.
Risk and remedy
Risk
If the incorrect park lock rod is installed, the transmission may not shift into 'PARK' and keep the vehicle from moving, increasing the risk of unintended vehicle movement and the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will install the correct park lock rod, free of charge. The recall began June 28, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U43.
Filed by
Chrysler (FCA US LLC) (manufacturer number U43)
Transmission and drivetrain complaints across Wrangler years