Owners of the 1990 Lincoln Town Car have reported 9 suspension problems to NHTSA, 4% of all complaints about this model year.
Where owners named a specific part, the most common were rear (7) and front (2).
Complaints were filed between June 1995 and July 2003.
For comparison, the 2003 Town Car has the most suspension complaints of any year, with 81.
Springs, struts, shocks, control arms, ball joints, bushings and stabilizer links, front and rear.
1 recall for this model year involves the suspension.
If your problem matches, a dealer repairs it free under the recall.
Complaints9
Typical mileagen/a
Crashes / fires0 / 0
Injuries0
Parts named in these complaints
Rear7
Front2
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
SuspensionFiled Jul 2003KS
This car is about a piece of junk. Paint is almost gone, 3 of 4 power windows dont work, windshield wiper motor has quit twice, rear suspension failed, radio non-functional, message center says that it is -76 degrees AT most times with 400 miles until empty (not true).
Owner complaint 10028622 filed with NHTSA
SuspensionFiled Jun 2000CA
The paint should not be peeling, I know this is not a safety but ford needs to know.my level ride is a safety problem.I will be driving AT 65 and all of a sudden the rear will start bouncing around.I have to slow down than the rear lowers itself after awhile it will go back on. Please help before something goes on.
Vehicle description: certain 1996-1999 ford crown victoria police, fleet, natural gas, and 1996-1999 lincoln town car limousine vehicles that were produced with a lower control arm ball joint containing a one piece bearing; and 1990-1996 ford crown victoria police, fleet, and ngv vehicles and 1990-1996 lincoln town car limousine vehicles that have been serviced with either a ball joint containing the one-piece bearing or a front lower control arm containing a ball joint with a one-piece bearing. The one-piece bearing within the lower control arm ball joint CAN weaken slowly during use and eventually crack. This could result in separation of the ball and cap of the joint, allowing the control arm to drop to the ground.
Risk and remedy
Risk
If this occurs while the vehicle is moving, reduced steering control could occur, increasing the risk of a crash.
Remedy
Dealers will replace the lower control arm ball joints (2).