There are 8 safety recalls on file for the 2000 Lincoln Town Car,
filed between June 2000 and August 2001.
Each one is repaired free by a franchised Lincoln dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 2000 Town Car is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
2001 (1)
01V258000
Filed Aug 8, 2001 1,083,000 vehicles
Vehicle description: passenger cars, sport utility vehicles, and light and medium duty pickup trucks. A switch located in the plastic cover of the wiper motor gear case could malfunction and overheat, potentially resulting in loss of intermittent wiper function, loss of wiper park function, complete loss of wiper function, or ignition of the plastic cover material. Switch malfunction is most likely to occur when the intermittent setting of the wipers is being used, or when snow or ICE obstructs the blades from returning to the "parked" position AT the bottom of the windshield. These vehicles were built AT the following assembly plants: atlanta plant from 2/11/00 through 7/31/00; chicago plant from 2/14/00 through 8/4/00; kansas city plant from 2/26/00 to 9/4/00; kentucky truck plant from 2/18/00 to 8/31/00; michigan truck plant from 2/23/00 through 8/3/00; norfolk plant from 2/21/00 through 7/27/00; wayne stamping and assembly plant from 2/25/00 through 8/15/00; and wixom plant from 2/15/00 through 8/8/00.
Risk and remedy
- Risk
- Loss of visibility while driving increases the risk of a crash.
- Remedy
- Dealers will inspect the date code on the wiper motor. Motors built with the suspect time frame will have the wiper motor gear case cover replaced. Owner notification began august 20, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford AT 1-866-436-7332.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 01S24)
2000 (7)
Vehicle description: certain limousines stretched over 60 inches fail to comply with the requirements of fmvss no. 109, "new pneumatic tires," and no. 110, "tire selection and rims."
Risk and remedy
- Risk
- The vehicle weight could exceed the maximum load rating for the tire, increasing the risk of premature tire wear or blowout.
- Remedy
- Dealers will replace all 5 tires (including the spare tire) with michelin tires (225/70r16 107t reinforced white sidewall) with a sufficiently higher load rating. Owner notification began january 10, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford AT 1-800-248-0186.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S51)
Vehicle description: certain passenger vehicles with medium graphite seat belts fail to comply with the requirements of fmvss no. 209, "seat belt assemblies." an incorrect front center seat belt and retractor assembly may have been installed.
Risk and remedy
- Risk
- In the event of a vehicle crash, the occupant may not be properly restrained.
- Remedy
- All suspect vehicles have had the seat belts inspected or replaced by ford.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S40)
Vehicle description: passenger vehicles with midnight black or medium parchment seat belts manufactured on july 31, 2000, fail to comply with the requirements of fmvss no. 209, "seat belt assemblies." an incorrect driver's side rear seat belt and retractor assembly may have been installed.
Risk and remedy
- Risk
- In the event of a vehicle crash, the occupant may not be properly restrained.
- Remedy
- Dealers will inspect the seat belts and replace the affected seat belt and retractor assemblies.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S41)
00V228001
Filed Aug 18, 2000 144,435 vehicles
Vehicle description: passenger vehicles, light duty trucks, sport utility vehicles, and mini vans equipped with trw seat belt buckle assemblies. The buckle base of these seat belt assemblies were not properly heat treated and therefore do not pass the load bearing requirement of federal motor vehicle safety standard no. 209, "seat belt assemblies."
Risk and remedy
- Risk
- In the event of a vehicle crash, the occupant may not be properly restrained.
- Remedy
- Dealers will inspect the date code on certain seat belt buckles of your vehicle and replace all seat belt buckles that fall within the suspect date code range. Owner notification began october 26, 2000. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford AT 1-800-392-3673.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S21)
00V200000
Filed Jul 18, 2000 875,000 vehicles
Vehicle description: passenger vehicles. These vehicles have jacking instructions which, if followed, could cause the vehicle operator to place the jack on a frame weld when attempting to raise a rear wheel. If the vehicle is jacked up with the jack placed on the frame weld and if the vehicle is free to roll (wheels not blocked or chocked), the jack could yield and the vehicle may drop suddenly.
Risk and remedy
- Risk
- If this occurs and any portion of the operator's body is under the vehicle, the potential for personal injury exists.
- Remedy
- Owners will be provided with a revised jack instruction and stowage card and jack warning label, as well as a supplement to the owner guide.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S13)
Vehicle description: passenger vehicles using aftermarket front passenger side seat belt assemblies that were sold by ford parts departments from january 1, through june 13, 2000. These seat belt assemblies fail to comply with the requirements of fmvss no. 209, "seat belt assemblies." the equipment involved is service stock seat belt assemblies, model nos. H 9977, h 9979, t 9063, and t 9217, built by trw vehicle safety systems, inc. (trw) manufactured from june 1, 1998 through may 21, 2000. Some of these seat belt assemblies may have been installed as service replacement equipment on the vehicles involved in the recall.
Risk and remedy
- Risk
- In the event of a collision, these seat belts may not restrain an occupant increasing the risk of injury.
- Remedy
- Dealers will inspect these vehicles and replace the service seat belt assemblies that were installed in these vehicles from january 1 through june 13, 2000.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S16)
Vehicle description: passenger vehicles using aftermarket driver's seat belt assemblies that were sold by ford parts departments from january 1, through june 13, 2000. These seat belt assemblies fail to comply with the requirements of fmvss no. 209, "seat belt assemblies." the equipment involved is service stock seat belt assemblies, model nos. H 9977, h 9979, t 9063, and t 9217, built by trw vehicle safety systems, inc. (trw) manufactured from june 1, 1998 through may 21, 2000. Some of these seat belt assemblies may have been installed as service replacement equipment on the vehicles involved in the recall.
Risk and remedy
- Risk
- In the event of a collision, these seat belts may not restrain an occupant increasing the risk of injury.
- Remedy
- Dealers will inspect these vehicles and replace the service seat belt assemblies that were installed in these vehicles from january 1 through june 13, 2000.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S15)
Recall questions
How many recalls does the 2000 Lincoln Town Car have?
NHTSA lists 8 recalls for the 2000 Lincoln Town Car.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.