Owners of the 1994 Mazda B-Series Truck have reported 30 brakes problems to NHTSA, 25% of all complaints about this model year.
Where owners named a specific part, the most common were foundation components (11), conventional (10), and antilock/traction control/electronic limited slip (8).
The typical report came at around 101,000 miles, and complaints were filed between January 1995 and March 2009.
These brakes complaints include 4 crashes.
No other B-Series Truck year has as many brakes complaints.
Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.
2 recalls for this model year involve the brakes.
If your problem matches, a dealer repairs it free under the recall.
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
BrakesFiled Mar 2009110,000 milesFL
Parking brake non-functional. Fuel leak, not able to locate. Repair shop claims probable no under warranty. Brake vacuum booster is failing. Rotors have been turned,pads replaced. Drivers seat back broken. Repaired. Broken again.
Owner complaint 10262575 filed with NHTSA
BrakesFiled Oct 200491,125 milesCA
During a trip from home to store, the dash lights for the ABS and brake system came on without any prior warning. Another driver made a u-turn in front of me prior to my arrival AT the store causing me to have to apply the brakes in an evasive manuever. The brakes l,ocked up and caused me to lose control of the vehicle. Fortunately, I was able to avoid the collision. I took the vehicle to a local repair shop and they informed me that the ABS hydraulic control valve needed to be replace.
Owner complaint 10093435 filed with NHTSA
BrakesFiled Feb 200482,000 milesPA
My truck a 1994 Mazda b-4000 4X4 lost brakes AT 40 to 45 MPH. I eneded up ditching the truck to avoid hitting a schoolbus that was letting off childeren a stop. My mechanic told me that this is a common problem with ford and Mazda. The problem was where the rubber brake line and steal brakeline come together blew apart. The result is a complete loss of brakes
The studs which attach the brake master cylinder to the power brake vacuum booster assembly CAN develop stress corrosion cracking after being operated for an extended period of time in the southern california location.
Risk and remedy
Risk
If a crack occurs, it could result in one or both studs fracturing. The master cylinder could then separate from the vacuum booster, when the brakes are applied, preventing the service brakes from fully activating increasing the risk of a vehicle accident.
Remedy
Dealers will replace the power brake vacuum booster assembly.
The parking brake control self-adjust pawl does not line up properly with the self-adjust rachet causing the pawl to slip over one or more teeth in the rachet.
Risk and remedy
Risk
When the above occurs, it CAN result in parking brake system ineffectiveness. The parking brake will not hold the vehicle, causing the vehicle to roll freely, if the transmission is not left in gear.
Remedy
A wedge will be installed which will serve to lock the parking brake self-adjust mechanism pawl into engagement with the rachet. Also, owners will be advised to release and reapply the parking brake whenever tooth skip occurs and will be reminded to always turn off the engine and leave the vehicle in gear when the vehicle is parked.