Mazda · MPV

2003 Mazda MPV Recalls

Minivan · FWD · Regular

There are 4 safety recalls on file for the 2003 Mazda MPV, filed between February 2003 and June 2004. Each one is repaired free by a franchised Mazda dealer, no matter how old the car is or who owns it now.

A recall covers a range of build dates, so not every 2003 MPV is affected by every campaign below. To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.

2004 (2)

04V282000 Filed Jun 10, 2004 20,000 vehicles

Labels

The tire inflation pressure indicated on the vehicle certification label is not correct. The labels show the maximum tire pressure as 240 kpa/32 PSI when it should be shown as 240 kpa/35 PSI. As a result of this error, the load ratios for the 205/65r15 94h and the 215/60r16 95h tires exceed the levels permitted by fmvss 120.

Risk and remedy
Risk
If the tire is operated in an under-inflated condition, the load carrying capacity of the vehicle may be compromised, increasing the risk of a crash.
Remedy
Owners will be provided with a corrected label that they CAN apply to their vehicle, or they CAN have a dealer install the label, if desired. The recall began on july 16, 2004. Owners should contact mazda AT 1-800-222-5500, option #4.
Filed by
MAZDA NORTH AMERICAN OPERATIONS (manufacturer number 2104F)
04V109000 Filed Mar 9, 2004 350 vehicles

Labels

Certain minivans fail to comply with the requirements of federal motor vehicle safety standard no. 208, "occupant crash protection." some of these vehicles were produced with air bag warning labels intended for the canadian market. Thus, the labels contain warnings in both english and french. As a result, the area of the english warning is only 16 square centimeters, as opposed to the 30 square centimeters required by the standard.

Risk and remedy
Remedy
Owners will be provided with air bag caution labels and installation instructions which were mailed on july 22, 2004. Owners should contact mazda AT 1-800-222-5500.
Filed by
MAZDA NORTH AMERICAN OPERATIONS (manufacturer number 1804C)

2003 (2)

03V206000 Filed Jun 5, 2003 64,000 vehicles

Fog lights

On certain mini vans and passenger vehicles, the socket holder in the fog lights is installed in the lamp casing using pressure. During operation of the fog light, the heat from the bulb CAN expand the socket holder. The expansion CAN force the socket holder rearward. After repeatedly being subject to this expansion, if the fog light is also subjected to vibration during vehicle operation, the socket holder with the bulb holder and the wiring harness may separate from the fog light casing.

Risk and remedy
Risk
Should this occur, the bulb socket and the harness CAN drop inside the bumper and possibly but rarely, the heat generated by the bulb CAN cause the bumper to burn.
Remedy
Dealers will install a spring to prevent the socket holder from separating from the lamp case. Owner notification began on july 14, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mazda AT 1-800-222-5500.
Filed by
MAZDA NORTH AMERICAN OPERATIONS (manufacturer number 1103F)
03V053000 Filed Feb 13, 2003 5,400 vehicles

Fog lights

On certain mini vans equipped with front fog lights,the fog light bulb socket may have been installed improperly.

Risk and remedy
Risk
If the vehicle continues to be used with this condition, the bulb socket and the wiring harness may separate from the fog light housing if exposed to shock and/or vibration and drop inside the bumper. Should this occur, the operation of the fog light may then cause the bumper to burn.
Remedy
Dealers will inspect the installation condition of the fog light bulb assembly, and repair it when necessary. Owner notification began march 31, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mazda AT 1-800-222-5500.
Filed by
MAZDA NORTH AMERICAN OPERATIONS (manufacturer number 0903C)

Recall questions

How many recalls does the 2003 Mazda MPV have?

NHTSA lists 4 recalls for the 2003 Mazda MPV.

How do I know if my car's recall was fixed?

Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.