There are 5 safety recalls on file for the 1993 Mercury Villager,
filed between September 1992 and January 2001.
Each one is repaired free by a franchised Mercury dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 1993 Villager is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
2001 (1)
Vehicle description: minivans. The fuel tank vent hose allows air to vent from the fuel tank during refueling. Cracks have developed in the vent hose. If (1) the fuel tank is overfilled, not allowing excess fuel in the vent hose to flow back into the tank, (2) the vehicle is driven only a short distance after refueling and, (3) there is subsequently significant heating of the fuel tank, the fuel in the tank CAN expand into the vent hose and leak fuel.
Risk and remedy
- Risk
- Fuel leakage in the presence of an ignition source CAN result in a fire.
- Remedy
- Dealers will replace the vent hose.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S59)
1995 (1)
Leaves and other foreign material CAN enter through the cowl panel air intake during operation of the front heater and/or air conditioning system resulting in a build-up of material in the plenum. This CAN lead to noise, odors, or in some cases, ignition of these materials.
Risk and remedy
- Risk
- A vehicle fire could occur.
- Remedy
- Dealers will install an additional heater/air conditioning system intake screen.
- Filed by
- FORD MOTOR COMPANY
1992 (3)
Fuel filler hoses may have been cut prior to installation by a utility knife used to open the shipping box.
Risk and remedy
- Risk
- Fuel leakage CAN result if the cut extended through thethickness of the hose wall. Leaking fuel CAN result in a fire if exposedto a source of ignition.
- Remedy
- Replace the fuel filler hose.
- Filed by
- FORD MOTOR COMPANY
One or both of the bolts securing the automatic seat belt restraint system tracks to the b-pillars were not adequately tightened.
Risk and remedy
- Risk
- This condition CAN result in the automatic seat beltsystem track joints having less than design strength, and increase the risk ofinjury to the seat occupant in the event of a collision or sudden stop.
- Remedy
- Dealers will tighten the passive restraint system track mounting bolts.
- Filed by
- FORD MOTOR COMPANY
The service brake master cylinder was not properly assembled or could have been damaged by the evacuation and filling of the brake system AT the assembly plant.
Risk and remedy
- Risk
- This CAN result in a partial brake system failure due tointernal master cylinder leakage which CAN cause loss of braking on two of thefour wheels. If this occurs, there would be increased brake pedal travel, higherpedal efforts and increased stopping distances.
- Remedy
- A new brake master cylinder will be installed.
- Filed by
- FORD MOTOR COMPANY
Recall questions
How many recalls does the 1993 Mercury Villager have?
NHTSA lists 5 recalls for the 1993 Mercury Villager.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.