Owners of the 2010 Nissan Armada have reported 7 brakes problems to NHTSA, 15% of all complaints about this model year.
The typical report came at around 45,000 miles, and complaints were filed between June 2011 and August 2024.
These brakes complaints include 1 fire.
For comparison, the 2004 Armada has the most brakes complaints of any year, with 317.
Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.
1 recall for this model year involves the brakes.
If your problem matches, a dealer repairs it free under the recall.
Complaints7
Typical mileage45k
Crashes / fires0 / 1
Injuries0
What owners say
BrakesFiled Aug 2024KY
We bought this Armada used about two years ago and it had about 85,000 miles on it then. On Monday August 26th 2024 my wife came home and as she pulled in to park the brake pedal went to the floor. The passenger side front steer tire inside was covered in brake fluid. I pulled it in to our garage and removed the tire and had her pump the brake pedal to find the fluid loss spot. Upon inspection I discovered the Steer tire had rubbed through the brake hose causing brake fluid loss. I replaced the hose and inspected the driver side to discover it was almost rubbed through to the cords inside the hose. It will be replaced too.
Owner complaint 11611553 filed with NHTSA
BrakesFiled Aug 2016NY
Letter from senator schumer on behalf of constituent re 2010 Nissan Armada SE active recall. *smd the consumer stated when he/she put the vehicle in reverse, the transmission changed hard, then the vdc off, brake, and slip lights illuminated. When the consumer put the vehicle in drive, and accelerated, the vehicle took off with more torque than it normally did. Upon trying to stop, the brakes went spongy, and came to a smooth stop, with the brake pedal all the way to the floor.
Nissan is recalling certain model year 2008-2010 titan, armada, and infiniti qx56, and model year 2008-2009 nissan quest vehicles. The brake pedal pivot pin end was not spin-formed to specification during the manufacturing process of the brake pedal assembly. The pivot pin could slide and cause the brake pedal to partially disengage from the brake pedal bracket.
Risk and remedy
Risk
The driver will experience unusual and noticeable looseness in the pedal and a reduction in braking force increasing the risk of a crash.
Remedy
Dealers will inspect to see if the pivot pin had been formed properly and will replace the brake pedal assembly if necessary free of charge. The safety recall began on march 22, 2010. Owners may contact nissan AT 1-800-647-7261.