Nissan · Sentra

2000 Nissan Sentra Recalls

Compact car · FWD · Regular

There are 6 safety recalls on file for the 2000 Nissan Sentra, filed between May 2001 and December 2003. Each one is repaired free by a franchised Nissan dealer, no matter how old the car is or who owns it now.

A recall covers a range of build dates, so not every 2000 Sentra is affected by every campaign below. To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.

2003 (3)

03V511000 Filed Dec 10, 2003 70 vehicles

Engine and engine cooling

On certain electric vehicles, the front suspension transverse link's ball joint bracket may break from stress concentration AT a notch created by surface roughness and the shape of the material cut-line.

Risk and remedy
Remedy
Dealers will replace the bracket on these vehicles. Owner notification began december 15, 2003. Owners should contact nissan AT 1-800-647-7261.
Filed by
NISSAN NORTH AMERICA, INC.
03V455000 Filed Nov 17, 2003 630,000 vehicles

Engine and engine cooling

On certain passenger vehicles, the circuit board for the crank position sensor or cam position sensor may have an improper solder joint due to solder deformation caused by heat stress accelerated by the existence of flux residue during the soldering process.

Risk and remedy
Risk
This could cause the "service engine soon" warning light to come on, create a no start condition, cause reduced engine power, or cause the engine to stop running without warning during vehicle operation, which could result in a crash.
Remedy
Dealers will replace the crank position sensors. Camshaft position sensor(s), and in some cases, the variable timing control sensor(s). Vehicles involved in a previous recall campaign, 01v357, are also included in this new campaign. The replacement sensors used in that campaign are also affected. Owner notification began on december 22, 2003. Owners should contact nissan AT 1-800-647-7261 or infiniti AT 1-800-662-6200.
Filed by
NISSAN NORTH AMERICA, INC. (manufacturer number R3021/R3022)
03V477000 Filed Nov 14, 2003 276,000 vehicles

Module

On certain passenger vehicles equipped with the qg18de engine or qr25de engines, the foam material used for the interior lining of the electronic control module (ECM) box emits sulfur as it cures.

Risk and remedy
Risk
If one of the resistors inside the ECM has a crack on the surface coating, the gas may cause corrosion of the resistor. This could cause the malfunction indicator light to come on, poor drivability (idle instability, poor accelerator), or the engine to stop running during vehicle operation, which could result in a crash.
Remedy
Dealers will remove the inside lining material from the ECM box. Owner notification began on december 22, 2003. Owners should contact nissan AT 1-800-647-7261.
Filed by
NISSAN NORTH AMERICA, INC. (manufacturer number P3163)

2001 (3)

01V357000 Filed Nov 16, 2001 103,000 vehicles

Gasoline

Vehicle description: passenger vehicles equipped with a 1.8 liter engine. The engine could stop running while being driven due to a defective crank position sensor. This could also result in the "service engine soon" warning light coming on or reduced engine power.

Risk and remedy
Risk
If the engine stops running while the vehicle is in motion, it could result in a crash.
Remedy
Dealers will replace the crank position sensors. Owner notification began december 10, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact nissan AT 1-800-647-7261.
Filed by
NISSAN NORTH AMERICA, INC.
01V277000 Filed Aug 29, 2001 115,000 vehicles

Wheels

Vehicle description: passenger vehicles. The cooling holes in the steel wheel may have burrs on their edges as a result of improper manufacturing. These burrs CAN cause cracks as the vehicle is being driven. Cracks CAN propagate between adjacent cooling holes. If enough cracks develop between the cooling holes, the wheel could fail and separate from the mounting hub without prior warning.

Risk and remedy
Risk
Separation of the wheel from the vehicle while being operated could result in a vehicle crash.
Remedy
Dealers will inspect for cracks and replace the wheel if cracks are discovered. Owner notification will be conducted in two phases. The first mailing began october 1, 2001, asking owners to bring their vehicles in to a dealer for inspection of the wheels. Any wheels with cracks will be replaced. A second owner notification will begin in early december, AT which time nissan will have an adequate number of replacement wheels, requesting owners to return to their dealers to have the wheels replaced. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact nissan AT 1-800-647-7261.
Filed by
NISSAN NORTH AMERICA, INC.
01V174000 Filed May 23, 2001 101,000 vehicles

Lower arm

Vehicle description: passenger vehicles. One or more of the three bolts used to attach each front suspension lower control arm to the body on the left and right sides may not have been properly manufactured.

Risk and remedy
Risk
The bolts could fracture, increasing the risk of a crash.
Remedy
Dealers will replace the lower control arm attachment bolts. Owner notification began june 30, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact nissan AT 1-800-647-7261.
Filed by
NISSAN NORTH AMERICA, INC.

Recall questions

How many recalls does the 2000 Nissan Sentra have?

NHTSA lists 6 recalls for the 2000 Nissan Sentra.

How do I know if my car's recall was fixed?

Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.