Owners of the 2002 Nissan Sentra have reported 157 engine problems to NHTSA, 49% of all complaints about this model year.
Where owners named a specific part, the most common were engine (49), exhaust system (15), and cooling system (7).
The typical report came at around 79,000 miles, and complaints were filed between May 2002 and November 2020.
These engine complaints include 2 crashes and 4 fires.
No other Sentra year has as many engine complaints.
Engine and cooling: stalling, loss of power, oil consumption, overheating, knocking, failed internal parts and check-engine faults traced to the engine.
4 recalls for this model year involve the engine.
If your problem matches, a dealer repairs it free under the recall.
Complaints157
Typical mileage79k
Crashes / fires2 / 4
Injuries0
Parts named in these complaints
Engine49
Exhaust System15
Cooling System7
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
EngineFiled Nov 2020102,000 milesWA
There's something wrong with the cooling system when I recall data refreshed on nov 04,2020 1unrepaired recalls associated with this VIN jan 09,2020 manufacturer recall numberpm684 NHTSA recall number20v-008 recall statusrecall incomplete summary takata has determined that a defect related to motor vehicle safety may arise in some of the subject non-desiccated ammonium nitrate inflators due to propellant degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high temperature cycling this car.
Owner complaint 11373048 filed with NHTSA
EngineFiled Sep 2020120,000 milesCA
Tl* the contact owns a 2002 Nissan Sentra. The contact stated that while driving 40 MPH or stopped AT a traffic light, the vehicle shutoff without warning. The contact had an independent mechanic replace the fuel pump, the spark plugs, the fuel filter and the exhaust pipes. A dealer was not contacted. The failure persisted. The manufacturer was contacted and informed of the failure. The failure mileage was 120,000.
Owner complaint 11359850 filed with NHTSA
EngineFiled Mar 202010,900 milesNY
I was made aware recently( March 2020) that the cam sensor in my car is defective. There was a recall on this part in 2004. After contacting the Nissan corporate headquarters, they inform me that their records show the recall remedy was satisfied in 2004. I do not remember bringing the car to the dealership nor does the dealership have any record the recall was satisfied.
On certain passenger vehicles equipped with a 2.5l engine, the crankshaft position sensor CAN overheat causing a brief interruption in the signal output from the sensor.
Risk and remedy
Risk
If the interruption in the signal from the crankshaft position sensor is so brief that the electronic control module (ECM) logic does not have time to diagnose the condition, the engine may stop running without warning while the vehicle is driven AT a low speed increasing the risk of a crash.
Remedy
Dealers will reprogram the ECM free of charge. Certain my 2006 altimas which have been previously remedied under recall campaign 06v223 (nissan r0606) are not included in this recall since the reprogramming for 06v223 also included this reprogramming. The recall began on december 31, 2007. Owners may contact nissan AT 1-800-647-7261.
On certain electric vehicles, the front suspension transverse link's ball joint bracket may break from stress concentration AT a notch created by surface roughness and the shape of the material cut-line.
Risk and remedy
Remedy
Dealers will replace the bracket on these vehicles. Owner notification began december 15, 2003. Owners should contact nissan AT 1-800-647-7261.
On certain passenger vehicles, the circuit board for the crank position sensor or cam position sensor may have an improper solder joint due to solder deformation caused by heat stress accelerated by the existence of flux residue during the soldering process.
Risk and remedy
Risk
This could cause the "service engine soon" warning light to come on, create a no start condition, cause reduced engine power, or cause the engine to stop running without warning during vehicle operation, which could result in a crash.
Remedy
Dealers will replace the crank position sensors. Camshaft position sensor(s), and in some cases, the variable timing control sensor(s). Vehicles involved in a previous recall campaign, 01v357, are also included in this new campaign. The replacement sensors used in that campaign are also affected. Owner notification began on december 22, 2003. Owners should contact nissan AT 1-800-647-7261 or infiniti AT 1-800-662-6200.
Filed by
NISSAN NORTH AMERICA, INC. (manufacturer number R3021/R3022)
On certain vehicles equipped with the 2.5 liter engine, the exhaust pipe hanger pin may catch debris from the road that could be ignited by contact with the main catalyst. Also on 2002 altima and sentra vehicles, certain engine operating conditions may cause the pre-catalyst to overheat and damage the catalyst substrate.
Risk and remedy
Risk
Either of these two conditions could result in a fire.
Remedy
Dealers will remove the protruding portion of the exhaust pipe hanger pin. In addition to the corrective action, in order to reduce the risk of fire in the event of poor or improper maintenance that could result in oil spillage, heat shield(s) will be installed on the pre-catalyst and exhaust tube. Owner notification began on july 28, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact nissan AT 1-800-647-7261. Nissan recall nos. R3007, r3014, r3015, r3016, r3017. Also on 2002 altima and sentra vehicles, certain engine operating conditions may cause the pre-catalyst to overheat and damage the catalyst substrate. If substrate particles enter the combustion chamber, they could score the cylinder walls, resulting in increased oil consumption. If the engine oil level is not checked on a periodic basis and drops below the low level, and the driver continues to operate the vehicle ignoring noticeable engine noise, engine damage may occur which could result in a fire. The pre-catalyst will be tested to ensure it is working properly and replaced if necessary. If damage is found inside the pre-catalyst, it will be necessary to replace the engine.
Filed by
NISSAN NORTH AMERICA, INC. (manufacturer number R3007/14/15/16/17)