There are 4 safety recalls on file for the 1991 Porsche 911,
filed between October 1992 and August 1996.
Each one is repaired free by a franchised Porsche dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 1991 911 is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
1996 (1)
A part of the steering column upper universal joint cracked during the manufacturing process.
Risk and remedy
- Risk
- This condition could result in noise and free play in the steering system and if left uncorrected, will result in loss of steering control.
- Remedy
- Dealers will inspect the universal joint for cracks and will replace cracked joints with new parts.
- Filed by
- PORSCHE CARS N.A. INC.
1993 (2)
The hydraulic brake pressure reduction valve causes the rate of hydraulic pressure reduction to slow down, which may result in the rear wheels locking-up even with the anti-lock brake system in operation.
Risk and remedy
- Risk
- Rear wheel lock-up may result in loss of vehiclecontrol and an accident.
- Remedy
- Porsche dealers will install a modified hydraulic brake pressure reduction valve.
- Filed by
- PORSCHE CARS N.A. INC.
After the engine has been turned off, the rear heater will automatically operate in order to dissipate heat in the engine heating system. During this operation, the resistor for the rear heater blower CAN become overloaded due to a binding or seized rear heater blower.
Risk and remedy
- Risk
- The overloaded resistor CAN create heat sufficient toignite the plastic air pipe to which it is connected, resulting in an enginecompartment fire.
- Remedy
- Porsche dealers will install a new resistor containing a circuit breaker.
- Filed by
- PORSCHE CARS N.A. INC.
1992 (1)
The ball sockets on the cruise control linkage CAN break, allowing the cruise control linkage to become detached on one end and jam on nearby components, which could impair throttle plate operation.
Risk and remedy
- Risk
- Impaired throttle plate operation could prevent theengine from returning to idle, resulting in unwanted engine speed and possiblevehicle accident.
- Remedy
- Replace the current plastic ball sockets with a new linkage using steel ball sockets, and lubricate the cruise control relay lever. Owners are advised not to use the cruise control until the modification is installed.
- Filed by
- PORSCHE CARS N.A. INC.
Recall questions
How many recalls does the 1991 Porsche 911 have?
NHTSA lists 4 recalls for the 1991 Porsche 911.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.