Owners of the 2017 Ram 1500 have reported 98 transmission problems to NHTSA, 11% of all complaints about this model year.
Where owners named a specific part, the most common were automatic transmission (4).
The typical report came at around 21,000 miles, and complaints were filed between April 2017 and September 2026.
These transmission complaints include 9 crashes and 2 injuries.
For comparison, the 2015 1500 has the most transmission complaints of any year, with 226.
Automatic and manual transmissions, CVTs, clutches, axles, driveshafts and transfer cases: harsh or delayed shifts, slipping, shuddering and rolling away in park.
3 recalls for this model year involve the transmission.
If your problem matches, a dealer repairs it free under the recall.
Complaints98
Typical mileage21k
Crashes / fires9 / 0
Injuries2
Parts named in these complaints
Automatic Transmission4
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Transmission and drivetrainFiled Sep 2026140,000 milesMN
The contact owns a 2017 Ram 1500. The contact stated that after reversing out of the driveway and shifting into drive(D, and depressing the accelerator pedal, the rear axle fractured. The vehicle was towed to an independent mechanic, where it was diagnosed and determined that the differential pin retaining screw had backed out, causing the rear axle failure. The mechanic determined that the rear axle assembly needed to be replaced. The contact associated the failure with NHTSA Campaign Number: 17V198000 (Power Train). The manufacturer was notified of the failure by phone and referred the contact to the NHTSA Hotline for assistance.
Owner complaint 11766061 filed with NHTSA
Transmission and drivetrainFiled Apr 2026104,520 milesOR
The contact owns a 2017 Ram 1500. The contact stated while driving at an undisclosed speed, the message "Service Electronic Stability Control" was displayed. While investigating the failure, the contact related the failure to an unknown recall; however, the VIN was not included. The vehicle was taken back to the residence, and the contact used an OBD reader to diagnose the vehicle. The contact determined that the tone wheel had failed and needed to be replaced. The vehicle was taken to a dealer, where it was confirmed that the tone wheel and the front passengerâs side axle needed to be replaced. The vehicle was not repaired.
Owner complaint 11734668 filed with NHTSA
Transmission and drivetrainFiled Apr 2026CO
Vehicle is having the same issues it had before with soot and sludge build up in the engine that caused the EGR to fail and melt into the engine... I have all the parts that were replaced from the 1st time this happened and was not repaired properly and is now causing a catastrophic failure....
Chrysler (FCA US LLC) is recalling certain 2017-2018 RAM 1500, 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Risk and remedy
Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners and dealers will update the Body Control Module software. Dealers will also test the BTSI operation, replacing the solenoid as necessary. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U11.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Risk and remedy
Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 1500 trucks. The differential pin retaining screw may come loose while driving, potentially causing the differential to break or lock up.
Risk and remedy
Risk
A broken or locked up differential may result in a loss of motive power and possibly a loss of vehicle control. Either scenario increases the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect and replace the differential retaining pin, free of charge. The recall began April 24, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T20.
Filed by
Chrysler (FCA US LLC) (manufacturer number T20)
Transmission and drivetrain complaints across 1500 years