Ram · 1500

2019 Ram 1500 Speed control Problems

Full-size pickup · 4WD, RWD · Midgrade

Owners of the 2019 Ram 1500 have reported 53 speed control problems to NHTSA, 4% of all complaints about this model year.

Where owners named a specific part, the most common were accelerator pedal (2) and throttle (1).

The typical report came at around 5,000 miles, and complaints were filed between September 2018 and September 2026.

These speed control complaints include 2 crashes and 1 injury.

For comparison, the 2016 1500 has the most speed control complaints of any year, with 111.

Accelerator pedals, throttle bodies and cruise control: unintended acceleration, stuck throttles and surging.

2 recalls for this model year involve the speed control. If your problem matches, a dealer repairs it free under the recall.
Complaints53
Typical mileage5k
Crashes / fires2 / 0
Injuries1

Parts named in these complaints

  • Accelerator Pedal2
  • Throttle1

Owners choose these labels when they file, so they are a guide rather than a diagnosis.

What owners say

Speed control Filed Sep 2026 CA

2019 Ram 1500, upon decelaration when coming to a stop, or to very slow, vehicle will drop into neutral/ lose ability to accelerate. Gear selecter dial indicator light will flash, dashboard message "shift to p, then select desired gear" will be displayed. During this time vehicle is unable to accelerate until driver come to a complete stop, shifts into n, then back into drive. Vehicle has lost ability to accelerate in the middle of active intersections, with active oncoming traffic from both infront and behind.

Owner complaint 11767502 filed with NHTSA
Speed control Filed Jul 2026 FL

​SUMMARY OF ISSUE: Water intrusion from a defective factory rear window seal flooded the Radio Frequency (RF) Hub module, causing severe, dangerous network communication (CAN bus) failures while driving. The removed RF Hub has been retained by the owner and is available for physical inspection upon request. SAFETY RISKS: Power steering repeatedly seizes/locks up while driving. ​Vehicle completely stalls and freezes in active intersections and at highway speeds on I-95.

Owner complaint 11751755 filed with NHTSA
Speed control Filed Jun 2026 MO

The ABS control module and Hydraulic Control module are faulty and available for inspection. My safety is at risk because the vehicle will go into a skid upon hard braking (ABS not fuctioning), the vehicle will spin tires upon acceleration (traction control inoperative). The above listed components have been determined faulty by both the dealership and an independent service center. The component is on national backorder (according to the dealership) due to how common this issue is. The ABS, traction control, and brake light stay illuminated as well as the dashboard "message center".

Owner complaint 11743493 filed with NHTSA

Related recalls

20V513000 Filed Aug 27, 2020 160,229 vehicles

Accelerator pedal

Chrysler (FCA US LLC) is recalling certain 2019-2020 Ram 1500 vehicles equipped with adjustable pedals. In certain accelerator pedal positions, the floormats may prevent the pedal from returning to the normal resting (idle) position.

Risk and remedy
Risk
A pedal that does not return as expected may affect the vehicle's deceleration, thereby increasing the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will modify the driver's floormat to remove the potential for pedal interference, free of charge. The recall began September 10, 2020. Owners may contact FCA US LLC customer service at 1-800-853-1403. Chrysler's number for this recall is W63.
Filed by
Chrysler (FCA US LLC) (manufacturer number W63)
18V332000 Filed May 17, 2018 4,815,661 vehicles

Software

Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.

Risk and remedy
Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Filed by
Chrysler (FCA US LLC) (manufacturer number U49,U59-U65,U68,U73)

Speed control complaints across 1500 years

Questions about speed control problems

How common are speed control problems on the 2019 Ram 1500?

53 owners have reported speed control problems to NHTSA, 4% of all complaints for this model year.

Is there a recall for speed control problems on the 2019 Ram 1500?

Yes. 2 recalls for this model year concern the speed control: 20V513000, 18V332000.