Owners of the 2017 Ram 3500 have reported 27 transmission problems to NHTSA, 9% of all complaints about this model year.
Where owners named a specific part, the most common were automatic transmission (1).
The typical report came at around 15,000 miles, and complaints were filed between March 2017 and April 2026.
These transmission complaints include 1 crash.
For comparison, the 2022 3500 has the most transmission complaints of any year, with 114.
Automatic and manual transmissions, CVTs, clutches, axles, driveshafts and transfer cases: harsh or delayed shifts, slipping, shuddering and rolling away in park.
2 recalls for this model year involve the transmission.
If your problem matches, a dealer repairs it free under the recall.
Complaints27
Typical mileage15k
Crashes / fires1 / 0
Injuries0
Parts named in these complaints
Automatic Transmission1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Transmission and drivetrainFiled Jul 2025NJ
While test driving a 2017 RAM 3500 6.7L Cummins diesel at Cherry Hill Dodge Chrysler Jeep Ram in Cherry Hill, New Jersey, both the check engine light and the regen warning light came on simultaneously. I returned to the dealership, looked up the regen warning, then retrieved my BlueDriver OBD2 scanner from my own vehicle. I scanned the truck on-site and ran live data. The scan confirmed the diesel particulate filter (DPF) was 100% full, and the regeneration system was not functioning. Permanent fault code P242F was stored, and the exhaust backpressure reading was over 25 PSI at idle â indicating a severely blocked system.
Owner complaint 11674103 filed with NHTSA
Transmission and drivetrainFiled Feb 2025MI
Column shifter became disconnected in Drive position. Unable to shift into neutral or park. Stuck in Drive position. Unable to turn engine off. Found steering column gear shift bracket broke. See attached picture.
Owner complaint 11641078 filed with NHTSA
Transmission and drivetrainFiled Oct 2024PA
While pulling my trailer on the interstate with cruise control set, I was going up a hill when all of a sudden my engine RPMs skyrocketed and my truck simultaneously lost propulsion. The cruise control system then disabled itself. My truck had slowed down enough that I turned my hazard lights on, and then selected a lower gear due to the decreased speed. While attempting to accelerate back to a normal speed, my trucks RPMs again skyrocketed and my truck simultaneously lost propulsion. I was now fairly certain that my clutch was slipping. I was able to limp the truck back to my shop.
Chrysler (FCA US LLC) is recalling certain 2017-2018 RAM 1500, 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Risk and remedy
Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners and dealers will update the Body Control Module software. Dealers will also test the BTSI operation, replacing the solenoid as necessary. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U11.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Risk and remedy
Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Filed by
Chrysler (FCA US LLC) (manufacturer number T79)
Transmission and drivetrain complaints across 3500 years