Owners of the 2019 Ram 3500 have reported 21 electrical problems to NHTSA, 15% of all complaints about this model year.
Where owners named a specific part, the most common were integrated trailer brake control (1) and wiring (1).
The typical report came at around 55,000 miles, and complaints were filed between December 2019 and September 2026.
These electrical complaints include 1 crash and 2 fires.
For comparison, the 2018 3500 has the most electrical complaints of any year, with 137.
Batteries, alternators, wiring, fuses, ignition, instrument clusters, infotainment and body electronics, including warning lights and parasitic drain.
1 recall for this model year involves the electrical.
If your problem matches, a dealer repairs it free under the recall.
Complaints21
Typical mileage55k
Crashes / fires1 / 2
Injuries0
Parts named in these complaints
Integrated Trailer Brake Control1
Wiring1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Electrical systemFiled Sep 2026CACrash
On my 2019 RAM 3500, I reported a problem with th eNHSTA back in 2023, and NO response yet. This is about the integrated brake controller, that provides NO electrical signal to stop the towed trailer at speeds what apear to be below 35MPH. This is a very dangerous failure on these trucks.
Owner complaint 11767624 filed with NHTSA
Electrical systemFiled Oct 2025VA
Recurring water intrusion through firewall/wiper cowl causes electrical corrosion and loss of vehicle communication (CAN bus). Dealer repeatedly documented: ⢠05/19/2022: âCowl drains clogged; water entering passenger sideâ (Invoice #XXX). ⢠08/15/2025: âWater intrusion through firewall due to wiper cowl drains being clogged with organic debris; water found in passenger kick-panel connectorâ (Invoice #XXX). Resulting failures include: ⢠BCM shorted (02/16/2022 â replaced). ⢠HVAC module failure (10/15/2022 â replaced).
Chrysler (FCA US LLC) is recalling certain 2019-2020 Ram 3500, 4500 and 5500 cab chassis built with a Cummins 6.7L High Output engine. Inadequate warmup protection can cause a lack of oil film on the engine connecting rod bearings while the engine is reaching operating temperature. This can result in engine damage and connecting rod failure, which could potentially puncture the engine block.
Risk and remedy
Risk
A damaged engine block may leak oil, which can contact hot engine or exhaust components, increasing the risk of a fire.
Remedy
Chrysler will notify owners, and dealers will flash the engine calibration software to enhance the engine warm up protection, free of charge. The recall began September 10, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W57.