There are 7 safety recalls on file for the 2000 Saturn SW,
filed between August 1999 and October 2000.
Each one is repaired free by a franchised Saturn dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 2000 SW is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
2000 (2)
Vehicle description: certain passenger vehicles, equipped with automatic transaxles, fail to comply with the requirements of fmvss no. 114, "theft protection." these vehicles were built with an improperly adjusted automatic transaxle park lock cable assembly. If improperly adjusted, it is possible to shift from the "park" position with the ignition key removed.
Risk and remedy
- Risk
- This condition increases the risk of a crash resulting from the unintended movement of parked vehicles.
- Remedy
- Saturn is asking owners and retailers to perform a functional check of the automatic transaxle park lock cable assembly operation, and if necessary, to have the cable adjusted. If owners are not comfortable performing the functional check themselves, they CAN have their dealer perform this inspection for them.
- Filed by
- GENERAL MOTORS CORP. (manufacturer number 00082)
Vehicle description: certain passenger vehicles fail to comply with the requirements of fmvss no. 301, "fuel system integrity." these vehicles were built with an inadequate vent valve weld on the top portion of the fuel tank.
Risk and remedy
- Risk
- Fuel spillage could occur during refueling or if the vehicle were involved in a rollover. If an ignition source were present, a fire could occur.
- Remedy
- Dealers will inspect the vehicle to ensure the fuel tank vent valve is properly welded. If necessary, dealers will replace the fuel tank assembly.
- Filed by
- GENERAL MOTORS CORP. (manufacturer number 00081)
1999 (5)
Vehicle description: passenger vehicles equipped with a console armrest fail to comply with requirements of fmvss no. 201, "occupant protection in interior impacts." the armrests were produced with a latch that will not withstand the vertical force requirements of the standard.
Risk and remedy
- Risk
- In the event of a crash, the latch may open and the armrest or the contents of the console could injure an occupant.
- Remedy
- Dealers will replace the console armrest latch.
- Filed by
- GENERAL MOTORS CORP. (manufacturer number 99071)
99V280000
Filed Oct 20, 1999 265,698 vehicles
Vehicle description: passenger vehicles. These vehicles do not comply with requirements of fmvss no. 210, "seat belt assembly anchorages." some of the vehicles were produced with seat belt shoulder guide anchor bolts that were not adequately tightened AT the center pillar and could fall out, making the seat belt inoperative.
Risk and remedy
- Risk
- In the event of a crash, the seat occupant may not be properly restrained.
- Remedy
- Dealers will inspect these vehicles for proper installation and torque of the seat belt shoulder guide anchor bolts.
- Filed by
- GENERAL MOTORS CORP. (manufacturer number 99067/99-C-02)
Vehicle description: passenger vehicles. These vehicles do not comply with requirements of fmvss no. 135, "passenger car brake systems." these vehicles were produced with brake pipe attachment nuts that may not be tightened to specifications.
Risk and remedy
- Risk
- If the brake pipe nuts are not properly tightened, brake fluid leakage could occur, increasing the brake's stopping distance.
- Remedy
- Dealers will inspect the brake pipe nuts for leakage, verify they are tightened to specifications, and replace the brake pipes if needed.
- Filed by
- GENERAL MOTORS CORP. (manufacturer number 99053/00-C-05)
Vehicle description: passenger vehicles. These vehicles do not comply with requirements of fmvss no. 581, "bumper standard." these vehicles were produced with rear bumper fasteners that may be loose or missing.
Risk and remedy
- Risk
- If the fasteners are loose or missing, the rear bumper may not absorb energy as it was designed to do in the event of a rear end collision.
- Remedy
- Dealers will verify that the rear bumper beam fasteners are present and properly tightened and, if missing, install new fasteners.
- Filed by
- GENERAL MOTORS CORP. (manufacturer number 99054/00-C-06)
Vehicle description: passenger vehicles. These vehicles do not comply with requirements of fmvss no. 208, "occupant crash protection." some of these vehicles were manufactured with welds in the instrument panel carrier assembly that do not meet saturn quality standards.
Risk and remedy
- Risk
- A front seat occupant, particularly an unbelted occupant, may have an increased risk of injury in a frontal crash.
- Remedy
- Dealers will repair the vehicle's instrument panel carrier assembly.
- Filed by
- GENERAL MOTORS CORP. (manufacturer number 99051/00-C-04)
Recall questions
How many recalls does the 2000 Saturn SW have?
NHTSA lists 7 recalls for the 2000 Saturn SW.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.