Owners of the 2019 Subaru Ascent have reported 90 transmission problems to NHTSA, 20% of all complaints about this model year.
Where owners named a specific part, the most common were automatic transmission (2).
The typical report came at around 18,000 miles, and complaints were filed between January 2019 and October 2026.
These transmission complaints include 2 crashes.
No other Ascent year has as many transmission complaints.
Automatic and manual transmissions, CVTs, clutches, axles, driveshafts and transfer cases: harsh or delayed shifts, slipping, shuddering and rolling away in park.
3 recalls for this model year involve the transmission.
If your problem matches, a dealer repairs it free under the recall.
Complaints90
Typical mileage18k
Crashes / fires2 / 0
Injuries0
Parts named in these complaints
Automatic Transmission2
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Transmission and drivetrainFiled Oct 2026108,000 milesNC
The contact owns a 2019 Subaru Ascent. The contact stated that while driving at 50 MPH, the vehicle hesitated. The vehicle was taken to a local dealer, where diagnostic trouble codes were identified, and a vehicle reprogramming was performed. While driving, the failure recurred. The vehicle was taken back to the dealer, where it was diagnosed that the transmission had failed and required replacement. Warranty coverage was not available; however, a loaner vehicle was provided. The contact associated the failure with NHTSA Campaign Number: 21V955000 (Power Train). The manufacturer advocacy center was notified.
Owner complaint 11772017 filed with NHTSA
Transmission and drivetrainFiled Sep 2026OR
Subaru of America has a Bulletin out that changes the front suspension arms for both front ends. The dealership made this correction and now the front end rattles like there are loose parts. Dealership says they donât hear it. Wonât investigate more unless I pay them a diagnostic fee. If Subaru of America knows this vehicle has a faulty part that causes the calipers to clamp down too hard thus warping the rotors! Dealership & SOA need to advertise this Bulletin as a recall.
Owner complaint 11762427 filed with NHTSA
Transmission and drivetrainFiled Aug 2026OH
The vehicle has 178k miles on it currently. I had to have a transmission and transfer case replaced at 68k miles. Done by Subaru. At 168k miles I had to have a new front pump in the transmission case replaced. Repair done by Subaru. Now at 178k miles the second replacement transmission has completely failed and needs replaced.
Subaru of America, Inc. (Subaru) is recalling certain 2019-2020 Ascent, 2020 Legacy and Outback vehicles. A programming error in the Transmission Control Unit (TCU) may allow the clutch to engage before the drive chain is completely clamped.
Risk and remedy
Risk
An improperly secured drive chain may slip and break, causing a loss of drive power and increasing the risk of a crash.
Remedy
Dealers will reprogram the TCU, inspect TCU data for chain slip, and visually inspect the chain guide. If evidence of chain slippage or damage is found, the transmission will be replaced. Repairs will be performed free of charge. Owner notification letters were mailed August 19, 2022. This recall includes all vehicles previously recalled under 19V-855. Vehicles previously recalled under 19V-855 will need to have the new remedy performed for this recall once available. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRK-21.
Filed by
Subaru of America, Inc. (manufacturer number WRK-21)
Subaru of America, Inc. (Subaru) is recalling certain 2019 Ascent vehicles. The transmission hydraulic sensor may inaccurately measure the hydraulic fluid pressure.
Risk and remedy
Risk
If the fluid pressure is measured higher than its actual value, the hydraulic pressure will be reduced. If this occurs, the transmission drive chain may not have the proper tension, resulting in a loss of drive power and an increased risk of a crash.
Remedy
Subaru will notify owners, and dealers will reprogram the transmission control unit. The hydraulic sensor harness will be replaced on vehicles with certain stored diagnostic trouble codes. In addition, any vehicle confirmed to have experienced low drive chain tension will have the transmission assembly will be replaced. All repairs will be free of charge. The recall began January 31, 2020. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUV-07.
Filed by
Subaru of America, Inc. (manufacturer number WUV-07)
Subaru of America, Inc. (Subaru) is recalling certain 2019 Ascent vehicles. The center support bolts for the driveshaft may loosen, possibly resulting in the front portion of the driveshaft disconnecting.
Risk and remedy
Risk
If the front end of the driveshaft separates, it can increase the risk of a crash.
Remedy
Subaru will notify owners, and dealers will replace the driveshaft assembly, including the center support brace, free of charge. The recall began July 26, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUI-94.
Filed by
Subaru of America, Inc. (manufacturer number WUI-94)
Transmission and drivetrain complaints across Ascent years