Owners of the 2009 Toyota Camry Hybrid have reported 11 visibility problems to NHTSA, 9% of all complaints about this model year.
The typical report came at around 65,000 miles, and complaints were filed between June 2013 and July 2019.
For comparison, the 2007 Camry Hybrid has the most visibility complaints of any year, with 34.
Wipers and washers, defrosters, mirrors, windows, backup cameras and windshield issues.
2 recalls for this model year involve the visibility.
If your problem matches, a dealer repairs it free under the recall.
Complaints11
Typical mileage65k
Crashes / fires0 / 0
Injuries0
What owners say
Visibility and wipersFiled Jul 2019100,120 milesIL
Melting dashboard and driver's side visor does not stay up. The melting dash causes a glare on the windshield causing visibility to be obstucted. I was told that I missed the warranty period but have never been sent anything about this problem.
Owner complaint 11230204 filed with NHTSA
Visibility and wipersFiled Oct 2018107,500 milesCT
While I was driving AT about 65 MPH on a four lane divided highway, the driver's visor suddenly and unexpectedly rotated completely down, blocking my view out of the windshield so that I could not see ahead. It was a dangerous and frightening situation! I had to keep control of the car while holding the visor up so that I could get home safely and then get the car to the repair facility. Toyota knew that this safety hazard existed and was serious because it did a "warranty enhancement notice" for 2007 to 2011 Camry Hybrid sun visor brackets, but this expired for my car in may of 2016.
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.
Risk and remedy
Risk
If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
Remedy
Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
Filed by
Toyota Motor Engineering & Manufacturing (manufacturer number C0M)
Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.
Risk and remedy
Risk
If the switch overheats, it may melt, possibly resulting in a fire.
Remedy
Toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. Toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their Toyota dealer or the Toyota Customer Experience Center at 1-800-331-4331. General Motors will contact the Pontiac Vibe owners affected by this recall and GM dealers will inspect and repair switches as necessary. Those owners may contact Pontiac Customer Care at 1-800-762-2737.
Filed by
Toyota Motor Engineering & Manufacturing
Visibility and wipers complaints across Camry Hybrid years