Owners of the 1991 Volkswagen Jetta have reported 5 speed control problems to NHTSA, 16% of all complaints about this model year.
Where owners named a specific part, the most common were accelerator pedal (2) and cables (1).
Complaints were filed between February 1995 and May 2017.
For comparison, the 2010 Jetta has the most speed control complaints of any year, with 30.
Accelerator pedals, throttle bodies and cruise control: unintended acceleration, stuck throttles and surging.
2 recalls for this model year involve the speed control.
If your problem matches, a dealer repairs it free under the recall.
Complaints5
Typical mileagen/a
Crashes / fires0 / 0
Injuries0
Parts named in these complaints
Accelerator Pedal2
Cables1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Speed controlFiled May 2017CA
Tl* the contact owns a 1991 Volkswagen Jetta. While driving approximately 35 MPH, the accelerator pedal independently disconnected. The contact was able to reconnect the pedal. The vehicle was not diagnosed or repaired the manufacturer was not made aware of the failure. The VIN and failure mileage were unknown. Updated 07/18/17
Owner complaint 10991149 filed with NHTSA
Speed controlFiled Mar 1999OH
The fuel throttle linkage would keep popping off. It was replaced AT least 4 different times. Each time it happened on the freeway and would last approximately 3-7 days.
The venturi tube located in the throttle valve housing CAN become loose and fall against the throttle plate.
Risk and remedy
Risk
The venturi tube CAN partially block the throttle plateand prevent it from returning to its full idle position, resulting in unwantedengine speed when the vehicle is placed in a forward or reverse gear.
Remedy
Replace the press-fit venturi tube with a thread type tube.
The lock nut of the cruise control rod for the operating servo may not have been properly torqued during manufacture.
Risk and remedy
Risk
Inadequate torque of the lock nut could allow the rodadjustment to change. This could increase the engine idle speed, and possiblyincrease stopping distance with a potential for a vehicle accident.
Remedy
Check and assure proper lock nut torque on the cruise control rod.