Volvo · VHD

2003 Volvo VHD Recalls

Model year 2003

Recalls 11 NHTSA campaigns Complaints 3 Most: electrical system
Fuel economy n/a No EPA rating
Crash rating pre-2011 NHTSA 5-Star program

There are 11 safety recalls on file for the 2003 Volvo VHD, filed between March 2003 and October 2012. Each one is repaired free by a franchised Volvo dealer, no matter how old the car is or who owns it now.

A recall covers a range of build dates, so not every 2003 VHD is affected by every campaign below. To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.

2012 (1)

12V510000 Filed Oct 18, 2012 1,496 vehicles

Seat belts

Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages."

Risk and remedy
Risk
In the event of a crash, an insufficient seat belt weld may prevent the seat belt from properly restraining the occupant. This increases the risk of injury to the seat occupant.
Remedy
Volvo Trucks of America will notify owners, and dealers will replace the suspected d-ring, free of change. The safety recall began on May 10, 2013. Owners may contact Volvo at 1-336-393-2000.
Filed by
Volvo Trucks North America (manufacturer number RVXX1204)

2009 (1)

09V173000 Filed May 21, 2009 127,764 vehicles

Windshield wiper/washer motor

Volvo trucks is recalling 127,764 my 2001-2008 vhd, vnl, vnm, and my 2005-2008 vt trucks. A seal may fail allowing water and contaminants to seep into the windshield wiper motor.

Risk and remedy
Risk
If this happens a short circuit may occur, which over time could possibly lead to a vehicle fire.
Remedy
Volvo will replace the wiper motor free of charge. Since this recall involves a large number of vehicles, volvo will release the recall in stages as parts are received. Priority will be given to the vehicles located in the regions/states that have a corrosive environment. The recall began on september 30, 2009. Owners may contact volvo trucks AT 1-800-528-6586.
Filed by
VOLVO TRUCKS NORTH AMERICA (manufacturer number RVXX0902)

2007 (1)

07V573000 Filed Dec 14, 2007 104,845 vehicles

Fuses and circuit breakers

On certain heavy duty trucks, the circuit protection (i.e. Automatic circuit breakers) used to protect the vehicle lighting system may not provide adequate protection.

Risk and remedy
Risk
If a short circuit occurs and is left untreated, components and wiring may be subject to overheating which could possibly result in a vehicle fire.
Remedy
Dealers will replace the circuit breakers with fuses. The recall began on february 25, 2008. Owners may contact volvo trucks AT 1-800-528-6586.
Filed by
VOLVO TRUCKS NORTH AMERICA (manufacturer number RVXX0707)

2006 (2)

06V213000 Filed Jun 14, 2006 873 vehicles

Wheels

On certain trucks, the wheel spacer may become distorted from heat which potentially could lead to a loss of clamp that may result in loose wheel nuts.

Risk and remedy
Risk
If the wheel nuts loosen for any reason, damage to the wheel studs and wheel may occur, and may lead to a complete separation of the wheels from the truck which could result in a vehicle crash.
Remedy
Dealers will replace the wheel spacers and the wheel equipment (wheels,studs, and hub) will be inspected for damage and replaced if necessary free of charge. The recall began on june 26, 2006. Owners may contact volvo trucks AT 1-800-528-6586.
Filed by
VOLVO TRUCKS NORTH AMERICA, INC. (manufacturer number RVXX0603)
06V021000 Filed Jan 26, 2006 33,102 vehicles

Exhaust system

On certain trucks equipped with d12d engines, the exhaust gas recirculation (EGR) cooler inlet pipes or the pipes that connect the EGR valves to the cooler may crack or break.

Risk and remedy
Risk
If the pipes or the cooler inlet pipes fail and are left untreated, the air cleaner and inner fender may be subject to hot exhaust gases, which could lead to a fire.
Remedy
Dealers will inspect and repair the EGR cooler pipes as required and install a heat shield free of charge. An interim owner letter was mailed on february 17, 2006, to advise on precautions that the owner CAN take until parts become available. Owners are being notified starting march 3, 2006, that parts are now available. Owners may contact volvo trucks AT 1-800-528-6586.
Filed by
VOLVO TRUCKS NORTH AMERICA, INC. (manufacturer number RVXX0601)

2004 (4)

04V457000 Filed Sep 17, 2004 56,154 vehicles

Windshield wiper/washer motor

On certain trucks equipped with valeo wiper systems, the wiper motor may be susceptive to salt intrusion that could possibly lead to a condition where the connector overheats to a point where the connector could ignite.

Risk and remedy
Risk
If this occurs, excessive heat and smoke could result in an under hood fire.
Remedy
Dealers will inspect and replace the connector plate on the windshield wiper motor. Phase 2 of the recall began on november 1, 2004. Owners should contact volvo trucks AT 1-800-528-6586.
Filed by
VOLVO TRUCKS NORTH AMERICA, INC. (manufacturer number RVXX0406)
04V404000 Filed Aug 12, 2004 126 vehicles

Seats

Certain trucks fail to conform to the requirements of federal motor vehicle safety standard no. 207, 'seating systems.' the bench seat, as installed, does not the seat pull requirements of the standard.

Risk and remedy
Risk
The seat anchorage to the floor may not be sufficient to retain the adjusted seating position, which could lead to personal injury or death in the even tof a crash.
Remedy
Dealers will replace the passenger side bench seat with a different brand of seat. The recall began november 1, 2004. Owners should contact volvo trucks AT 1-800-528-6586.
Filed by
VOLVO TRUCKS NORTH AMERICA, INC. (manufacturer number RVXX0405)
04V078000 Filed Feb 13, 2004 92 vehicles

Shaft pitman

On certain heavy-duty class 8 trucks, the pinch bolt attaching the steering drag link to the pitman arm may not have been sufficiently tightened.

Risk and remedy
Risk
The bolt could loosen allowing the drag link and pitman arm to separate, resulting in uncontrollable steering which could result in a crash.
Remedy
Dealers will install a new pinch bolt and tighten to the required torque. Owner notification is expected to begin during march 2004. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks AT 1-800-528-6586.
Filed by
VOLVO TRUCKS NORTH AMERICA, INC. (manufacturer number RVXX0401)
04V077000 Filed Feb 13, 2004 2,112 vehicles

Engine and engine cooling

On certain heavy-duty class 8 trucks, the assembled engine pre-heater jumper wiring harness was incorrectly assembled.

Risk and remedy
Risk
The engine pre-heater could overheat resulting in damage to the pre-heater and other engine heat sensitive components near the pre-heater and the ability to re-start the engine could be compromised, increasing the risk of a crash.
Remedy
Dealers will repair the affected circuits in the jumper wiring harness connector. Owner notification is expected to begin during march 2004. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks AT 1-800-528-6586.
Filed by
VOLVO TRUCKS NORTH AMERICA, INC. (manufacturer number RVXX0402)

2003 (2)

03V204000 Filed May 30, 2003 1,275 vehicles

Fifth wheel assembly

On certain heavy duty trucks equipped with jost international jsk 37u series fifth wheels, a fatigue crack CAN develop in the bracket pin weld under certain loading conditions.

Risk and remedy
Risk
If left undetected or corrected it could lead to the separation of the fifth wheel top plate from its mounting structure, possibly resulting in a crash.
Remedy
Dealers will replace the bracket pins and repair instructions free of charge. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact jost international AT 616-846-7700 or by email to [email protected] or volvo truck AT 800-528-6586.
Filed by
VOLVO TRUCKS NORTH AMERICA INC
03V108000 Filed Mar 20, 2003 396 vehicles

Anchorage

Certain heavy duty class 8 trucks equipped with an optional two-man passenger bench seat fail to comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages." on the two-man passenger bench seat inboard (center) position, seat belt d-ring mounting bracket weldnut, the weld is not sufficient to meet the seat belt pull requirements .

Risk and remedy
Risk
These trucks do not comply with the requirements.
Remedy
Dealers will replace the seat belt d-ring mounting bracket. Owner notification began on april 7, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks AT 1-800-528-6586.
Filed by
VOLVO TRUCKS NORTH AMERICA INC (manufacturer number RVXX0303)

Recall questions

How many recalls does the 2003 Volvo VHD have?

NHTSA lists 11 recalls for the 2003 Volvo VHD.

How do I know if my car's recall was fixed?

Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.