Owners of the 1993 BMW 318i have reported 10 engine problems to NHTSA, 91% of all complaints about this model year.
Where owners named a specific part, the most common were engine (7) and cooling system (3).
Complaints were filed between January 1998 and February 2002.
No other 318i year has as many engine complaints.
Engine and cooling: stalling, loss of power, oil consumption, overheating, knocking, failed internal parts and check-engine faults traced to the engine.
1 recall for this model year involves the engine.
If your problem matches, a dealer repairs it free under the recall.
Complaints10
Typical mileagen/a
Crashes / fires0 / 0
Injuries0
Parts named in these complaints
Engine7
Cooling System3
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
EngineFiled Oct 1999GA
All coolant lost, suddenly & w/o warning; coolant lost into the environment; sudden engine temperature rise required dangerous emergency manouver to reach side of road before engine damage; following vehicles may have been damaged & drivers blinded by lost coolant
Owner complaint 714056 filed with NHTSA
EngineFiled Dec 1998GA
Vehicle had blown an engine head gasket AT 46,000 miles.also, ignition was not working. Had no warning prior to seeing steam coming from under the hood. Shut vehicle down & then restarted. Engine check light still came back on.
Vehicle description: passenger vehicles. A malfunction or failure of a coolant system component, such as a thermostat, water pump, or fan belt, CAN result in significantly increased coolant temperature and system pressure. If the indications of a critical overheating condition is not noticed by the driver, it is possible that damage to, or failure of, a coolant system component could occur.
Risk and remedy
Risk
If a crack were to form or a seam were to separate in the heater core end piece, hot coolant could suddenly be expelled, increasing the risk of personal injury to a vehicle occupant.
Remedy
Dealers will install a new design radiator cap to control pressure and provide greater coolant overflow in the event of overheating.