There are 3 safety recalls on file for the 1992 BMW 325,
filed between April 1992 and April 1994.
Each one is repaired free by a franchised BMW dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 1992 325 is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
1994 (1)
94V066000
Filed Apr 11, 1994 116,300 vehicles
Feed fuel hoses CAN harden and "set" over time, allowing a seepage of fuel AT the connection between the hose and the engine fitting. The clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose.
Risk and remedy
- Risk
- Fuel seepage between the feed fuel hose and the engine fitting CAN result in free fuel in the engine compartment, which could result in a fire when exposed to a source of ignition.
- Remedy
- A redesigned feed fuel hose and hose clamp will be installed to alleviate the fuel seepage.
- Filed by
- BAYERISCHE MOTOREN WERKE
1993 (1)
The malfunction or failure of a coolant system component results in significantly increased coolant temperature and a resulting increase in system pressure.
Risk and remedy
- Risk
- Vehicles operated under this increased cooling systempressure condition CAN suffer damage or failure of parts of the cooling systemsuch as (1) leakage from a coolant hose, (2) leakage of the radiator orexpansion tank, (3) disconnection of a hose from a pipe or a fitting, and (4)cracks in the heater core end piece resulting in coolant leakage. In some cases,boiling coolant CAN contact the lower right leg of the driver resulting inburns. Also, escaping coolant in the passenger compartment CAN cause vaporfogging of the interior surface of the windows, reducing driver visibility.
- Remedy
- Dealers will install a thermostatic bypass valve in the engine compartment to control coolant temperature in the heater core. Also, a new design radiator cap will be installed, to control pressure and provide greater coolant overflow in the event of overheating.
- Filed by
- BAYERISCHE MOTOREN WERKE
1992 (1)
The vehicle failed to comply with fmvss 208. The driver's chest resultant acceleration exceeded the allowable 60 g's in a crash test when the seat height changes adjustment under severe frontal impact.
Risk and remedy
- Risk
- The driver of a vehicle faces increased risk of injuryin the event of a sudden stop or accident.
- Remedy
- Install a damper on the underside of the driver's seat cushion, between the cushion frame and the seat track. In a severe frontal impact the damper will hydraulically lock, preventing a change in seat height.
- Filed by
- BAYERISCHE MOTOREN WERKE
Recall questions
How many recalls does the 1992 BMW 325 have?
NHTSA lists 3 recalls for the 1992 BMW 325.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.