Ford · Crown Victoria

1998 Ford Crown Victoria Recalls

Large car · RWD · Regular

There are 7 safety recalls on file for the 1998 Ford Crown Victoria, filed between December 1998 and February 2008. Each one is repaired free by a franchised Ford dealer, no matter how old the car is or who owns it now.

A recall covers a range of build dates, so not every 1998 Crown Victoria is affected by every campaign below. To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.

2008 (1)

08V051000 Filed Feb 4, 2008 225,000 vehicles

Cruise control

Ford is recalling 225,000 my 1992-2003 econoline, my 1993-1995 taurus sho, my 1992-1998 crown victoria, my 1993 bronco, f-series, my 1995-1997 f-series super duty stripped chassis, my 1992-1998 mercury grand marquis, and my 1992-1995 lincoln town car vehicles. The affected vehicles were previously repaired using a wiring harness that is not compatible with the vehicle circuit polarity.

Risk and remedy
Risk
As a result, the fuse is located in the output circuit rather than in the intended input power feed circuit, and may not offer the intended protection in the event of an electrical short to ground.
Remedy
Dealers will install a new wiring harness, or replace the mating electrical component. The recall began on february 18, 2008. Owners may contact ford AT 1-800-392-3673.
Filed by
FORD MOTOR COMPANY (manufacturer number 08S01)

2007 (1)

07V336000 Filed Aug 3, 2007 3,600,000 vehicles

Vehicle speed control

On certain pickup trucks, passenger vehicles, sport utility vehicles, and motor homes chassis, the speed control deactivation switch may, under certain conditions, leak internally and then overheat, smoke, or burn.

Risk and remedy
Risk
This could result in an underhood fire.
Remedy
Dealers will install a fused wiring harness. Owners of the passenger cars included in this campaign will be instructed to return their vehicles to their dealers to have the speed control deactivation switch disconnected as an interim repair. As soon as repair parts are available (expected october 2007), owners will be instructed to return to the dealers for installation of a fused wiring harness. The recall began on august 13, 2007, and mailing completed by september 19, 2007. Owners may contact ford AT 1-888-222-2751.
Filed by
FORD MOTOR COMPANY (manufacturer number 05S28)

2003 (1)

03V472000 Filed Nov 6, 2003 4,218 vehicles

Tank assembly

On certain natural gas vehicles, if a flame from a vehicle interior fire becomes locally directed AT the natural gas fuel tank located immediately behind the rear seat, the flame could damage the fiberglass wrap on the tank weakening the tank.

Risk and remedy
Risk
If the strength of the tank is significantly compromised, it could rupture, increasing the risk of a fire.
Remedy
Dealers will install an insulator behind the current seat back. Owner notification began on january 7, 2004. Owners should contact ford AT 1-800-392-3673.
Filed by
FORD MOTOR COMPANY (manufacturer number 03S08)

2000 (3)

00V200000 Filed Jul 18, 2000 875,000 vehicles

Integrated jack/leveler/stabilizer

Vehicle description: passenger vehicles. These vehicles have jacking instructions which, if followed, could cause the vehicle operator to place the jack on a frame weld when attempting to raise a rear wheel. If the vehicle is jacked up with the jack placed on the frame weld and if the vehicle is free to roll (wheels not blocked or chocked), the jack could yield and the vehicle may drop suddenly.

Risk and remedy
Risk
If this occurs and any portion of the operator's body is under the vehicle, the potential for personal injury exists.
Remedy
Owners will be provided with a revised jack instruction and stowage card and jack warning label, as well as a supplement to the owner guide.
Filed by
FORD MOTOR COMPANY (manufacturer number 00S13)
00V157002 Filed Jun 12, 2000 1,129 vehicles

Anchorage

Vehicle description: passenger vehicles using aftermarket front passenger side seat belt assemblies that were sold by ford parts departments from january 1, through june 13, 2000. These seat belt assemblies fail to comply with the requirements of fmvss no. 209, "seat belt assemblies." the equipment involved is service stock seat belt assemblies, model nos. H 9977, h 9979, t 9063, and t 9217, built by trw vehicle safety systems, inc. (trw) manufactured from june 1, 1998 through may 21, 2000. Some of these seat belt assemblies may have been installed as service replacement equipment on the vehicles involved in the recall.

Risk and remedy
Risk
In the event of a collision, these seat belts may not restrain an occupant increasing the risk of injury.
Remedy
Dealers will inspect these vehicles and replace the service seat belt assemblies that were installed in these vehicles from january 1 through june 13, 2000.
Filed by
FORD MOTOR COMPANY (manufacturer number 00S16)
00V157001 Filed Jun 12, 2000 1,167 vehicles

Anchorage

Vehicle description: passenger vehicles using aftermarket driver's seat belt assemblies that were sold by ford parts departments from january 1, through june 13, 2000. These seat belt assemblies fail to comply with the requirements of fmvss no. 209, "seat belt assemblies." the equipment involved is service stock seat belt assemblies, model nos. H 9977, h 9979, t 9063, and t 9217, built by trw vehicle safety systems, inc. (trw) manufactured from june 1, 1998 through may 21, 2000. Some of these seat belt assemblies may have been installed as service replacement equipment on the vehicles involved in the recall.

Risk and remedy
Risk
In the event of a collision, these seat belts may not restrain an occupant increasing the risk of injury.
Remedy
Dealers will inspect these vehicles and replace the service seat belt assemblies that were installed in these vehicles from january 1 through june 13, 2000.
Filed by
FORD MOTOR COMPANY (manufacturer number 00S15)

1998 (1)

98V322000 Filed Dec 16, 1998 175,000 vehicles

Lower ball joint

Vehicle description: certain 1996-1999 ford crown victoria police, fleet, natural gas, and 1996-1999 lincoln town car limousine vehicles that were produced with a lower control arm ball joint containing a one piece bearing; and 1990-1996 ford crown victoria police, fleet, and ngv vehicles and 1990-1996 lincoln town car limousine vehicles that have been serviced with either a ball joint containing the one-piece bearing or a front lower control arm containing a ball joint with a one-piece bearing. The one-piece bearing within the lower control arm ball joint CAN weaken slowly during use and eventually crack. This could result in separation of the ball and cap of the joint, allowing the control arm to drop to the ground.

Risk and remedy
Risk
If this occurs while the vehicle is moving, reduced steering control could occur, increasing the risk of a crash.
Remedy
Dealers will replace the lower control arm ball joints (2).
Filed by
FORD MOTOR COMPANY (manufacturer number 98S37)

Recall questions

How many recalls does the 1998 Ford Crown Victoria have?

NHTSA lists 7 recalls for the 1998 Ford Crown Victoria.

How do I know if my car's recall was fixed?

Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.