There are 7 safety recalls on file for the 2000 Ford Crown Victoria,
filed between February 2000 and November 2003.
Each one is repaired free by a franchised Ford dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 2000 Crown Victoria is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
2003 (1)
On certain natural gas vehicles, if a flame from a vehicle interior fire becomes locally directed AT the natural gas fuel tank located immediately behind the rear seat, the flame could damage the fiberglass wrap on the tank weakening the tank.
Risk and remedy
- Risk
- If the strength of the tank is significantly compromised, it could rupture, increasing the risk of a fire.
- Remedy
- Dealers will install an insulator behind the current seat back. Owner notification began on january 7, 2004. Owners should contact ford AT 1-800-392-3673.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 03S08)
2000 (6)
00V200000
Filed Jul 18, 2000 875,000 vehicles
Vehicle description: passenger vehicles. These vehicles have jacking instructions which, if followed, could cause the vehicle operator to place the jack on a frame weld when attempting to raise a rear wheel. If the vehicle is jacked up with the jack placed on the frame weld and if the vehicle is free to roll (wheels not blocked or chocked), the jack could yield and the vehicle may drop suddenly.
Risk and remedy
- Risk
- If this occurs and any portion of the operator's body is under the vehicle, the potential for personal injury exists.
- Remedy
- Owners will be provided with a revised jack instruction and stowage card and jack warning label, as well as a supplement to the owner guide.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S13)
Vehicle description: passenger vehicles using aftermarket front passenger side seat belt assemblies that were sold by ford parts departments from january 1, through june 13, 2000. These seat belt assemblies fail to comply with the requirements of fmvss no. 209, "seat belt assemblies." the equipment involved is service stock seat belt assemblies, model nos. H 9977, h 9979, t 9063, and t 9217, built by trw vehicle safety systems, inc. (trw) manufactured from june 1, 1998 through may 21, 2000. Some of these seat belt assemblies may have been installed as service replacement equipment on the vehicles involved in the recall.
Risk and remedy
- Risk
- In the event of a collision, these seat belts may not restrain an occupant increasing the risk of injury.
- Remedy
- Dealers will inspect these vehicles and replace the service seat belt assemblies that were installed in these vehicles from january 1 through june 13, 2000.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S16)
Vehicle description: passenger vehicles using aftermarket driver's seat belt assemblies that were sold by ford parts departments from january 1, through june 13, 2000. These seat belt assemblies fail to comply with the requirements of fmvss no. 209, "seat belt assemblies." the equipment involved is service stock seat belt assemblies, model nos. H 9977, h 9979, t 9063, and t 9217, built by trw vehicle safety systems, inc. (trw) manufactured from june 1, 1998 through may 21, 2000. Some of these seat belt assemblies may have been installed as service replacement equipment on the vehicles involved in the recall.
Risk and remedy
- Risk
- In the event of a collision, these seat belts may not restrain an occupant increasing the risk of injury.
- Remedy
- Dealers will inspect these vehicles and replace the service seat belt assemblies that were installed in these vehicles from january 1 through june 13, 2000.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S15)
Vehicle description: a windshield wiper control module may not be capable of carrying the current required during high load conditions on the wipers (i.e., ICE, snow, or other debris).
Risk and remedy
- Risk
- This condition could result in inoperative wipers with no advance warning.
- Remedy
- Dealers will inspect the wiper control modules and replace if necessary.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S09)
Vehicle description: passenger vehicles. These vehicles may have been built with the left rear seat belt retractor attaching bolts incorrectly tightened.
Risk and remedy
- Risk
- In the event of a crash, the vehicle occupant may not be properly restrained, increasing the risk of personal injury.
- Remedy
- Dealers will tighten the retractor mounting bolts to the specified torque.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S06)
Vehicle description: passenger vehicles. These vehicles may have been built with lower than the intended level of torque on the bolts that attach the air bag electronic crash sensor module to the vehicle.
Risk and remedy
- Risk
- A loose module could result in a delayed air bag deployment in the event of a vehicle crash.
- Remedy
- Dealers will tighten the air bag electronic crash sensor attaching bolts.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S02)
Recall questions
How many recalls does the 2000 Ford Crown Victoria have?
NHTSA lists 7 recalls for the 2000 Ford Crown Victoria.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.