11V385000
Filed Jul 29, 2011 1,100,000 vehicles
Ford is recalling certain 1997 through 2003 model year ford F-150, 2004 model year ford F-150 heritage, 1997 through 1999 model year F-250 less than 8,500 lbs. Gross vehicle weight rating (gvwr), and 2002 and 2003 lincoln blackwood vehicles manufactured from june 20, 1995, through august 4, 2004, originally sold, or currently registered in, connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin, and the district of columbia. Prolonged exposure to road deicing chemicals may cause severe corrosion of the fuel tank straps which secure the tank to the vehicle.
Risk and remedy
- Risk
- As a result of the corrosion, one or both straps may fail allowing the fuel lines to separate from the tank, or in some cases, causing the tank to contact the ground. Either scenario may result in a fuel leak presenting a fire hazard.
- Remedy
- Ford will notify owners and instruct them to take their vehicles to a ford or lincoln dealer to have the fuel tank straps replaced with straps that have increased corrosion protection. Early in this campaign, if replacement straps are not available, dealers may install a cable support under the strap as an interim repair or a steel reinforcement over the existing strap as a permanent repair. Any repairs will be performed free of charge. The safety recall began on september 16, 2011. Owners may contact ford motor company customer relationship center AT 1-866-436-7332. Ford's recall campaign number is 11s21
- Filed by
- FORD MOTOR COMPANY (manufacturer number 11S21)
Vehicle description: pickup trucks equipped with gasoline engines and 8 foot boxes, may not fully satisfy the requirements of fmvss no. 301, "fuel system integrity." in a 30 MPH frontal barrier crash test, a fuel tank vapor recovery valve separated internally. During the subsequent static rollover test, fuel spillage exceeded the specified rate.
Risk and remedy
- Risk
- Fuel leakage, in the presence of an ignition source, could result in a fire.
- Remedy
- Dealers will install a stop plate assembly on the vehicle frame to prevent recovery valve contact with a frame crossmember during the impact sequence.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 99S32)
99V219000
Filed Aug 12, 1999 245,300 vehicles
Vehicle description: gasoline and diesel engine pickup trucks equipped with 8 foot beds, do not fully satisfy the requirements of fmvss no. 301, "fuel system integrity." the fuel tank front strap isolator may not be properly positioned which could result in the strap cutting the tank during a 30 MPH front barrier test, resulting in fuel spillage.
Risk and remedy
- Risk
- During the subsequent static rollover test, fuel spillage exceeded the specified rate, increasing the risk of a fire.
- Remedy
- Dealers will reposition the front strap isolator.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 99S11)
99V093002
Filed Apr 27, 1999 102,700 vehicles
Vehicle description: pickup trucks equipped with 6" beds manufactured from january 5, 1998 through june 4, 1999, do not not fully satisfy the post crash test static rollover requirements of fmvss no. 301, "fuel system integrity." contact between the fuel tank and a fuel tank locator bracket during a front barrier impact test resulted in a cut in the tank, resulting in fuel leakage.
Risk and remedy
- Risk
- Fuel leakage in the presence of an ignition source could result in a fire.
- Remedy
- Dealers will replace the fuel tank locator bracket with a similar bracket whose design has been revised to incorporate more rounded surfaces where contact with the tank occurs.
- Filed by
- FORD MOTOR COMPANY
99V093001
Filed Apr 27, 1999 293,650 vehicles
Vehicle description: gasoline and diesel engine pickup trucks equipped with 6" and 8" beds manufactured from january 5, 1998 through march 21, 1999, do not not fully satisfy the post crash test static rollover requirements of fmvss no. 301, "fuel system integrity." six attachment bolts (m12 bolts) may have been damaged during the 30 MPH front barrier test allowing the bolts to shift or become detached, resulting in fuel spillage.
Risk and remedy
- Risk
- Fuel leakage in the presence of an ignition source could result in a fire.
- Remedy
- Dealers will augment the box-to-chassis attachment by installing box-to-chassis retaining cables.
- Filed by
- FORD MOTOR COMPANY