There are 4 safety recalls on file for the 2001 Ford F-250,
filed between March 2001 and August 2006.
Each one is repaired free by a franchised Ford dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 2001 F-250 is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
2006 (1)
06V286000
Filed Aug 1, 2006 1,200,000 vehicles
On certain trucks equipped with speed control, gasoline or natural gas engines, the speed control deactivation switch may overheat.
Risk and remedy
- Risk
- Overheating could result in smoke or burn and an underhood fire.
- Remedy
- Dealers will install a fused wiring harness into the speed control system free of charge. The recall began on august 7, 2006. Owners may contact ford AT 1-866-436-7332. (note: also see recalls 05v017 and 05v388)
- Filed by
- FORD MOTOR COMPANY (manufacturer number 05S28)
2001 (3)
01V258000
Filed Aug 8, 2001 1,083,000 vehicles
Vehicle description: passenger cars, sport utility vehicles, and light and medium duty pickup trucks. A switch located in the plastic cover of the wiper motor gear case could malfunction and overheat, potentially resulting in loss of intermittent wiper function, loss of wiper park function, complete loss of wiper function, or ignition of the plastic cover material. Switch malfunction is most likely to occur when the intermittent setting of the wipers is being used, or when snow or ICE obstructs the blades from returning to the "parked" position AT the bottom of the windshield. These vehicles were built AT the following assembly plants: atlanta plant from 2/11/00 through 7/31/00; chicago plant from 2/14/00 through 8/4/00; kansas city plant from 2/26/00 to 9/4/00; kentucky truck plant from 2/18/00 to 8/31/00; michigan truck plant from 2/23/00 through 8/3/00; norfolk plant from 2/21/00 through 7/27/00; wayne stamping and assembly plant from 2/25/00 through 8/15/00; and wixom plant from 2/15/00 through 8/8/00.
Risk and remedy
- Risk
- Loss of visibility while driving increases the risk of a crash.
- Remedy
- Dealers will inspect the date code on the wiper motor. Motors built with the suspect time frame will have the wiper motor gear case cover replaced. Owner notification began august 20, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford AT 1-866-436-7332.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 01S24)
01V227001
Filed Jul 16, 2001 1,400,000 vehicles
Vehicle description: passenger and sport utility vehicles, pickup trucks, and minivans. Equipped with seat belts supplied by trw. It is possible that the driver's and/or front passenger's outboard seat belt buckle may not fully latch. Ford crown victoria built AT st. Thomas assembly plant from 4/17/00 - 5/29/01 mercury grand marquis built AT st. Thomas assembly plant from 4/17/00 - 5/29/01. Lincoln town cars built AT wixom assembly plant from 3/27/00 - 5/30/01. Lincoln navigators built AT michigan truck plant from 4/11/00 - 5/31/01. Ford windstars built AT oakville assembly plant from 3/23/00 - 5/30/01. Ford rangers built AT twin cities plant from 3/28/00 - 5/30/01, and also AT the edison plant from 3/13/00 - 5/25/01. Ford F-150 truck built AT norfolk plant from 4/18/00 - 5/25/00; AT ontario plant from 5/10/00 - 5/28/01; AT kansas city plant from 9/11/99 - 5/25/01; and AT cuautitlan plant from 5/16/00 - 6/9/01. Ford super duty F-250, F-350, f-450, and f-550 trucks built AT kentucky plant from 4/17/00 - 5/27/01; and AT cuautitlan plant from 5/16/00 - 6/19/01. Ford excursions built AT kentucky plant from 4/17/00 - 10/2/00. Ford expeditions built AT michigan truck plant from 4/11/00 - 5/31/01.
Risk and remedy
- Risk
- In the event of a crash, the restraint system may not provide adequate occupant protection, increasing the risk of personal injury to the seat occupant.
- Remedy
- Dealers will inspect the front outboard seat belt buckles and if the buckle fails the inspection process, it will be replaced. Owner notification began july 25, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford AT 1-866-436-7332.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 01S21)
Vehicle description: passenger and sport utility vehicles. The inflator canister in the driver air bag module may have an inadequate weld near the igniter.
Risk and remedy
- Risk
- In the event of a vehicle crash, the driver air bag may not deploy as intended, potentially resulting in reduced occupant protection, or a burn injury.
- Remedy
- Dealers will install a driver air bag module. Owner notification began march 19, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford AT 1-800-392-3673.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 01S10)
Recall questions
How many recalls does the 2001 Ford F-250 have?
NHTSA lists 4 recalls for the 2001 Ford F-250.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.